No abstract

Micro/nano soft magnetic composite based on the Fe microparticles and the MgO nanoparticles was prepared by cold pressing followed by microwave sintering. Magnetic and mechanical properties of the green compact as well as sintered samples were measured. Coercivity, permeability, resistivity, elastic modulus and transverse rupture strength values in dependence on MgO content were investigated. The influence of MgO content ratio on properties was different in the case of as pressed green samples in comparison to sintered bodies. Microstructure formation and its influence on mechanical and magnetic properties are discussed. The coercivity of the green compacts with 1-5 wt% of MgO exhibits approximately 460 A/m and after sintering decreases to approximately 290 A/m. The real part of complex permeability at the frequency of 100 kHz exhibits a maximum for 2 wt% of MgO in green compacts, while for 10 wt% in sintered samples. It was observed that increase of the content of MgO causes decrease of the permeability. Properties of the sintered composite are related to formation of magnesium ferrite as well as volume distribution of residual MgO in dependence on initial MgO ratio.

No abstract