The objective of this study was to examine the sensor response characteristics of three commercial Internet of Things (IoT) compatible metal oxide (MOx) sensors in preparation for the development of field-scale sensor networks for the real-time monitoring of volatile organic compounds (VOCs) in indoor environments located in proximity to brownfield sites. Currently, there is limited examination of such sensor responses to relevant mixtures of target VOCs, such as the common petrochemicals benzene, toluene, ethylbenzene, and xylene (BTEX), as well as chlorinated aliphatic hydrocarbon (CAH) contaminants such as tetrachloroethylene (PCE) and trichloroethylene (TCE) which are frequently associated with deterioration of indoor air quality. To address this, a study of three commercial metal oxide (MOx) sensors (SGP30, BME680, and CCS811) was undertaken to examine the sensor response characteristics of individual components as well as mixtures of each of the target BTEX and CAH chemicals over relevant indoor air concentrations within the operating range of the MOx sensors (0–6000 ppb). Our investigation revealed similar response patterns to those previously reported for the thick film MOx sensor to most individual target VOCs, however, response trends for mixtures were more difficult to discern. In general, the MOx sensors we examined demonstrated similar magnitude responses to the CAHs as BTEX compounds indicating reliable detection of CAHs.