Flexible, stretchable, and bendable materials, including inorganic semiconductors, organic polymers, graphene, and transition metal dichalcogenides (TMDs), are attracting great attention in such areas as wearable electronics, biomedical technologies, foldable displays, and wearable point-of-care biosensors for healthcare. Among a broad range of layered TMDs, atomically thin layered molybdenum disulfide (MoS 2 ) has been of particular interest, due to its exceptional electronic properties, including tunable bandgap and charge carrier mobility. MoS 2 atomic layers can be used as a channel or a gate dielectric for fabricating atomically thin field-effect transistors (FETs) for electronic and optoelectronic devices. This review briefly introduces the processing and spectroscopic characterization of large-area MoS 2 atomically thin layers. The review summarizes the different strategies in enhancing the charge carrier mobility and switching speed of MoS 2 FETs by integrating high-κ dielectrics, encapsulating layers, and other 2D van der Waals layered materials into flexible MoS 2 device structures. The photoluminescence (PL) of MoS 2 atomic layers has, after chemical treatment, been dramatically improved to near-unity quantum yield. Ultraflexible and wearable active-matrix organic light-emitting diode (AM-OLED) displays and wafer-scale flexible resistive random-access memory (RRAM) arrays have been assembled using flexible MoS 2 transistors. The review discusses the overall recent progress made in developing MoS 2 based flexible FETs, OLED displays, nonvolatile memory (NVM) devices, piezoelectric nanogenerators (PNGs), and sensors for wearable electronic and optoelectronic devices. Finally, it outlines the perspectives and tremendous opportunities offered by a large family of atomically thin-layered TMDs. KEYWORDS: molybdenum disulfide (MoS 2 ), flexible electronics, flexible field-effect transistors (FETs), wearable organic light-emitting diode (OLED), flexible memory devices, flexible piezoelectric nanogenerators (PNGs), sensors

Despite heightened interest in 2D transition-metal dichalcogenide (TMD) doping methods for future layered semiconductor devices, most doping research is currently limited to molybdenum disulfide (MoS2), which is generally used for n-channel 2D transistors. In addition, previously reported TMD doping techniques result in only high-level doping concentrations (degenerate) in which TMD materials behave as near-metallic layers. Here, we demonstrate a controllable nondegenerate p-type doping (p-doping) technique on tungsten diselenide (WSe2) for p-channel 2D transistors by adjusting the concentration of octadecyltrichlorosilane (OTS). This p-doping phenomenon originates from the methyl (-CH3) functional groups in OTS, which exhibit a positive pole and consequently reduce the electron carrier density in WSe2. The controlled p-doping levels are between 2.1 × 10(11) and 5.2 × 10(11) cm(-2) in the nondegenerate regime, where the performance parameters of WSe2-based electronic and optoelectronic devices can be properly designed or optimized (threshold voltage↑, on-/off-currents↑, field-effect mobility↑, photoresponsivity↓, and detectivity↓ as the doping level increases). The p-doping effect provided by OTS is sustained in ambient air for a long time showing small changes in the device performance (18-34% loss of ΔVTH initially achieved by OTS doping for 60 h). Furthermore, performance degradation is almost completely recovered by additional thermal annealing at 120 °C. Through Raman spectroscopy and electrical/optical measurements, we have also confirmed that the OTS doping phenomenon is independent of the thickness of the WSe2 films. We expect that our controllable p-doping method will make it possible to successfully integrate future layered semiconductor devices.

A high-performance ReS2 -based thin-film transistor and photodetector with high on/off-current ratio (10(4) ), high mobility (7.6 cm(2) V(-1) s(-1) ), high photoresponsivity (2.5 × 10(7) A W(-1) ), and fast temporal response (rising and decaying time of 670 ms and 5.6 s, respectively) through O2 plasma treatment is reported.

By plasma-enhanced chemical vapor deposition, a molybdenum disulfide (MoS2 ) thin film is synthesized directly on a wafer-scale plastic substrate at below 300 °C. The carrier mobility of the films is 3.74 cm(2) V(-1) s(-1) . Also, humidity is successfully detected with MoS2 -based sensors fabricated on the flexible substrate, which reveals its potential for flexible sensing devices.

BP thinning was carried out using a monoenergetic Ar+ ion beam and the BP could be thinned without damaging the surface.