The question of how to obtain the best inocula for conventional biofilters arises when an acclimation/adaptation procedure is to be applied. Bearing in mind that no standardized procedure for acclimating inocula exists, certain preliminary strategies for obtaining an active inoculum from wastewater treatment sludge are proposed in this work. Toluene was the contaminant to be degraded. Concerning the prior separation of sludge phases, no obvious advantage was found in separating the supernatant phase of the sludge before acclimation. As far as a continuous or discontinuous acclimation mode is concerned, the latter is recommended for rapidly obtaining acclimated sludge samples by operating the system for no longer than 1 month. The continuous mode rendered similar degradation rates, although it required longer operating time. Nevertheless, the great advantage of the continuous system lay in the absence of daily maintenance and the ready availability of the activated sample.

Biotechnology has emerged as an affordable, effective, and eco-friendly alternative to treat carbon disulfide (CS2) containing waste gases. Carbon disulfide is a chemical of widespread use both in the past and in the present. Its industry demand has dramatically changed over the last two decades and is expected to grow in future in step with those industries involving fibre, mining, rubber products, and the agro-chemical sector. This compound, classified as a hazardous air pollutant about 20 years ago, has been re-appraised, as increasingly restrictive pollution standards are expected to be introduced. An array of physical–chemical technologies for treating CS2 containing air are already in use, but they have a series of drawbacks, such as high energy consumption (incineration, thermal oxidation), the immobilization of the contaminant solely from one phase to another (adsorption), and the generation of secondary by-products that require additional treatment (hydrolysis). Thus, technological research on affordable processing alternatives is of considerable interest for related industries using or producing CS2. The biological technologies whose efficiency is based on the activity of microorganisms to biodegrade air pollutants overcome many of the disadvantages of conventional techniques and are especially useful for the removal of relatively low concentrations of pollutants. In this paper, the main properties, sources, and uses of CS2 are summarized, and alternative biotreatments for CS2 are reviewed. Several applications of the technical and economical feasibility of biofilters and biotrickling filters are shown, although their widespread industrial application still requires further research.