A calibration of the well-defined Braunbek coil system was carried out using the scalar method. The whole measuring setup was designed to minimize the uncertainty of the scalar calibration procedure. The measurement time as well as the sampling ratio were adjusted to reduce the influence of the ambient magnetic field variation. We calibrated the coil sensitivity with the uncertainty of 30 ppm and orthogonality with the uncertainty <0.01°. The results were compared with a different technique.

No abstract

No abstract

A method is presented which allows a system available for the measurement of the dynamic electromagnetic properties of magnetic stripes to be extended in such a way that the stripes' static properties can be determined from the remanent magnetization curve. The results of some check measurements show good correlation with the results of static measurement methods so far applied. The advantages and prerequisites, as well as the steps to be taken and the hardware required for the set-up will be described and the measurement sequence explained.

No abstract