Solar steam generation is regarded as one of the most sustainable techniques for desalination and wastewater treatment. However, there has been a lack of scalable material systems with high efficiency under 1 Sun. A solar steam generation device is designed utilizing crossplane water transport in wood via nanoscale channels and the preferred thermal transport direction is decoupled to reduce the conductive heat loss. A high steam generation efficiency of 80% under 1 Sun and 89% under 10 Suns is achieved. Surprisingly, the crossplanes perpendicular to the mesoporous wood can provide rapid water transport via the pits and spirals. The cellulose nanofibers are circularly oriented around the pits and highly aligned along spirals to draw water across lumens. Meanwhile, the anisotropic thermal conduction of mesoporous wood is utilized, which can provide better insulation than widely used super‐thermal insulator Styrofoam (≈0.03 W m−1 K−1). The crossplane direction of wood exhibits a thermal conductivity of 0.11 W m−1 K−1. The anisotropic thermal conduction redirects the absorbed heat along the in‐plane direction while impeding the conductive heat loss to the water. The solar steam generation device is promising for cost‐effective and large‐scale application under ambient solar irradiance.

The global fresh water shortage has driven enormous endeavors in seawater desalination and wastewater purification; among these, solar steam generation is effective in extracting fresh water by efficient utilization of naturally abundant solar energy. For solar steam generation, the primary focus is to design new materials that are biodegradable, sustainable, of low cost, and have high solar steam generation efficiency. Here, we designed a bilayer aerogel structure employing naturally abundant cellulose nanofibrils (CNFs) as basic building blocks to achieve sustainability and biodegradability as well as employing a carbon nanotube (CNT) layer for efficient solar utilization with over 97.5% of light absorbance from 300 to 1200 nm wavelength. The ultralow density (0.0096 g/cm) of the aerogel ensures that minimal material is required, reducing the production cost while at the same time satisfying the water transport and thermal-insulation requirements due to its highly porous structure (99.4% porosity). Owing to its rationally designed structure and thermal-regulation performance, the bilayer CNF-CNT aerogel exhibits a high solar-energy conversion efficiency of 76.3% and 1.11 kg m h at 1 kW m (1 Sun) solar irradiation, comparable or even higher than most of the reported solar steam generation devices. Therefore, the all-nanofiber aerogel presents a new route for designing biodegradable, sustainable, and scalable solar steam generation devices with superb performance.

Solar steam generation, combining the most abundant resources of solar energy and unpurified water, has been regarded as one of the most promising techniques for water purification. Here, an artificial tree with a reverse‐tree design is demonstrated as a cost‐effective, scalable yet highly efficient steam‐generation device. The reverse‐tree design implies that the wood is placed on the water with the tree‐growth direction parallel to the water surface; accordingly, water is transported in a direction perpendicular to what occurs in natural tree. The artificial tree is fabricated by cutting the natural tree along the longitudinal direction followed by surface carbonization (called as C‐L‐Wood). The nature‐made 3D interconnected micro‐/nanochannels enable efficient water transpiration, while the layered channels block the heat effectively. A much lower thermal conductivity (0.11 W m−1 K−1) thus can be achieved, only 1/3 of that of the horizontally cut wood. Meanwhile, the carbonized surface can absorb almost all the incident light. The simultaneous optimizations of water transpiration, thermal management, and light absorption results in a high efficiency of 89% at 10 kW m−2, among the highest values in literature. Such wood‐based high‐performance, cost‐effective, scalable steam‐generation device can provide an attractive solution to the pressing global clean water shortage problem.

No abstract

No abstract