Generally, earthquake resistant design is based on elastic structural analysis with load factor to simulate ultimate condition. Actually, behavior of collapse structures during earthquake is in-elastic. Evaluation to predict in-elastic condition of structures during earthquake is needed in order to guarantee that it can perform well during earthquake. Analysis and performance evaluation can be done with pushover analysis given in SAP2000, while evaluation of performance point must be determined manually with various methods (except for capacity spectrum method). Pushover analysis is a non linear static analysis as a behavior of structural failure due to earthquake, while performance point is structural maximum displacement during design earthquake. Study on steel frame 3D concludes that performance evaluation for pushover in longitudinal direction according to ATC-40 gives displacement target for moment frame building of 0.054 m, building with eccentrically braced frame (EBF): 0.022 m. Pushover in transverse direction according to ATC-40 gives displacement target for moment frame building of 0.022 m, building with EBF: 0.015 m. According to FEMA 356, displacement target in longitudinal direction for moment frame building: 0.0803 m, building with (EBF): 0.0728 m. For building with moment frame in transverse direction: 0.1183 m, building with (EBF): 0.0614 m.

Message security is very important now. Because security is part of the privacy of someone who wants to protect messages from those who do not have the right to read or receive them. The method used for securing information messages with message encryption and decryption techniques is the Playfair Cipher algorithm combined with the Least Significant Bit (LSB) method. In this study it was found that the Playfair Cipher algorithm is quite safe in implementing cryptographic encryption or ciphertext because the playfair cipher has a level of appearance of letters that is so difficult to predict so that the ciphertext becomes a randomized collection of data. For the Least Significant Bit (LSB) steganography method in the insertion of a secret or embedded message it is difficult to guess in plain view the changes that occur between before and after the image is inserted are not too significant. Also see the value of the Peak-Signal-to-Noise ratio or PSNR can still be considered good quality due to> 30 decibels (dB). So the final result of the combination of the Playfair Cipher algorithm with the Least Significant Bit (LSB) method is quite good in securing messages.