A three-dimensional comprehensively coupled model has been developed to describe the transport phenomena, including fluid flow, heat transfer, solidification, and solute redistribution in the continuous casting process. The continuous casting process is considered as a solidification process in a multicomponent solid-liquid phase system. The porous media theory is used to model the blockage of fluid flow by columnar dendrites in the mushy zone. The relation between flow pattern and the shape of the solid shell is demonstrated. Double diffusive convection caused by thermal and concentration gradients is considered. The change in the liquidus temperature with liquid concentration is also considered. The formation mechanism of macrosegregation is investigated. Calculated solid shell thickness and temperature distribution in liquid core are compared with the measured quantities for validating the model.

No abstract

Currently, laser surface treatment (LST) is considered the most promising method available within the industry. It delivers precise control over surface topography, morphology, wettability, and chemistry, making the technique suitable for regulating the corrosion behavior of alloys. In this paper, femtosecond laser texturing with different parameters and atmosphere environments was adopted to clarify the effect of surface treatment on the corrosion resistance of selective laser melted (SLM-ed) 17-4PH stainless steel (SS) in a NaCl solution. The experimental results show that, after the heat treatment, the corrosion resistance of the laser-treated samples was enhanced. With the further laser treatment in an argon atmosphere, the oxidation of nanostructural surfaces was avoided. The Cr, Cu, and other alloying elements precipitated on the laser-ablated surface were beneficial to the formation of a passivation film, leading to an improved corrosion resistance performance.

No abstract

Experiments of the return current post installed X-pinches were carried out on the 1-MA "QiangGuang-1" facility with the purpose of understanding X-pinch characteristics under this setup and establishing X-pinch backlighting diagnostics for the wire-array Z-pinches. Different wire-array loads along with the two-wire 30 μm Mo X-pinch backlighter were tested. The X-pinches emit the X-ray radiation with the burst time variation of ± 4 ns and the bright spot size of ∼30 μm. X-ray backlighting shadowgraphy images of the over-mass and radiation-suppressed Z-pinch wire array were obtained.