Recently, yearly production of SRF (Solid Recovered Fuel) as an alternative fuel has been rapidly increasing because of the limited waste disposal, rise in oil prices and reduction of greenhouse gas emission. However, SRF using facilities are excluded from the National Air Pollutant Emission Estimation because SRF using facilities are not yet included among the SCC (Source Classification Code). The purpose of this research was to estimate the emission and emission factor of SRF using facilities' PM and NO x , in order to investigate whether or not they are included in the National Air Pollutant Emission Estimation.The emission factors of SRF using facilities' PM and NO x are calculated as 0.216 kg/ton, and 3.970 kg/ton, and the emission was estimated based on the yearly total SRF usage of 2011. The results above was 18.7% for PM and 12.8% for NO x emissions from combustion facility (SCC2) in manufacturing industry combustion (SCC1) of CAPSS. If CAPSS estimate the emission by adding SCC on unlisted SRF in case of Boiler (SCC3) fuel, both PM and NO x 's emissions would increase by 15.8% and 11.3% compare to the emissions for the existing combustion facility. As a result, emissions caused by SRF should be considered when calculating the National Air Pollutant Emission Estimation. In addition, further researches to develop emission factor and improve subdivided SCC should be done in the future, for the accurate and reliable estimation of National Emission.

Globally, use of affordable fuels such as briquettes, woods and wood pellets has increased. Organic pollutants emitted from non-point sources using solid fuels may have contributed to air pollution in urban environment. In this study, we utilized simulated incinerator proposed by U.S. EPA and investigated concentrations of PM, PM 10 , PM 2.5 , OC/EC, CO, SO x , NO x , VOCs and PAHs emitted while cooking meat and fish using briquettes, woods and wood pellets, and developed emission factors. As a result, wood combustion produced more air pollutants than the others. Particulate matter emission factors for woods and wood pellets were 13.54 g/kg and 9.15 g/kg, respectively. Total VOCs emission factors for briquettes, woods and wood pellets were 36.12 mg/kg, 46.13 mg/kg and 18.26 mg/ kg, respectively. Additionally, total PAHs emission factors for briquette, woods and wood pellets were 0.44 mg/kg, 18.84 mg/kg and 101.62 mg/kg, respectively.