In this study, rumen fluid of animal ruminant was used as inoculums to increase biogas production rate from cattle manure at mesophilic condition. A series of laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure (M) was fed to each biodigester and mixed with rumen fluid (R) and tap water (W) in

No abstract

No abstract

This paper concerns with heterogeneous modeling of deepbed grain dryers based on two-phase model by taking into account coupled heat and mass transfer within grains. This model also consider axial mass and heat dispersion in the fluid phase. The dynamic two-phase equations are solved numerically by finite difference with alternating direction implicit method algorithm, and then applied to simulate humidity and temperature profile of drying gas across dryers together with moisture content and temperature of grains. The capabilities of these models were compared with experimental data obtained from available literatures, under drying conditions such as temperature and absolute humidity of drying gas and moisture content of grains. The simulation results show that the dynamic of corn drying within the bed is well predicted by the two-phase model. 269

In this paper, we present the characteristics and performance of polymer electrolyte membranes (PEMs) based on poly(vinylidene fluoride) (PVDF). The membranes were prepared via a phase-inversion method (non-solvent-induced phase separation (NIPS)). As separators for lithium battery systems, additive modified montmorillonite (MMT) nano-clay served as a filler and poly(vinylpyrrolidone) (PVP) was used as a pore-forming agent. The membranes modified with an additive (8 wt % nano-clay and 7 wt % PVP) showed an increased porosity (87%) and an uptake of a large amount of electrolyte (801.69%), which generated a high level of ionic conductivity (5.61 mS cm−1) at room temperature. A graphite/PEMs/LiFePO4 coin cell CR2032 showed excellent stability in cycling performance (average discharge capacity 127 mA h g−1). Based on these results, PEMs are promising materials to be used in Polymer Electrolyte Membranes in lithium-ion batteries.