The paper shows the constituents and technical properties of low calcium aluminates cement concretes with ultra dispersed mineral powders and admixtures.

No abstract

It was carried out a study on the properties of polymer modified concrete (PCM) in fresh and hardened state. It was used three types of polymers: epoxy resins, polyurethane and methylcellulose in different percentages and different water cement ratio.The main objectives was to improve workability and rheological behavior of these mixtures in fresh state and mechanical strength tests on hard concrete. Has been investigated the polymer influence on compression strength and flexural strength and analyzing the time evolution of these strengths and participation of polymer in the microstructure formation.

Abstract.

The European methodology for plastics, as a feature of the EU’s circular economy activity plan, ought to support the decrease in plastic waste. The improvement of recycled plastics’ economics and quality is one important part of this action plan. Additionally, achieving the requirement that all plastic packaging sold in the EU by 2030 be recyclable or reusable is an important objective. This means that food packaging materials should be recycled in a closed loop at the end. One of the most significant engineering polymers is polyethylene terephthalate (PET), which is widely used. Due to its numerous crucial qualities, it has a wide variety of applications, from packaging to fibers. The thermoplastic polyolefin, primarily polyethylene and polypropylene (PP), is a popular choice utilized globally in a wide range of applications. In the first phase of the current experiment, the materials were obtained by hot pressing with the press machine. The reinforcer is made of Al nanopowder 800 nm and Fe nanopowder 790 nm and the quality of the recycled polymer was examined using Fourier transform infrared spectroscopy (FTIR), a scanning electron microscope (SEM), and differential scanning calorimetry (DSC). From DSC variation curves as a function of temperature, the values from the transformation processes (glass transition, crystallization, and melting) are obtained. SEM measurements revealed that the polymer composites with Al have smooth spherical particles while the ones with Fe have bigger rough spherical particles.