No abstract

No abstract

No abstract

An alternative reinforcing shear technique was proposed during this work in place of the traditional vertical stirrups. Three reinforced concrete beams with dimensions of (200 * 300) mm and a length of 1800 mm were used. A reference control beam with traditional vertical stirrups (RCWS) and two beams reinforced with flamingo with a fixed angle of 45° and free ends (50% and 50%) from effective depth were used, while the main variable was the bonding process with concrete using a screw head (FWS) and hook (FWH). In the flamingo technique, the hook was used and the screw head was used at an equal angle of 130 degrees. A significant improvement was found in the shear capacity of the beam compared to the reference sample. Also, using a screw head made the shear capacity 13.22% higher than using a hook and improved the shear ductility, final deflection, and crushing behavior of beams made with the flamingo technique.