The direct-drive, laser-based approach to inertial confinement fusion (ICF) is reviewed from its inception following the demonstration of the first laser to its implementation on the present generation of high-power lasers. The review focuses on the evolution of scientific understanding gained from target-physics experiments in many areas, identifying problems that were demonstrated and the solutions implemented. The review starts with the basic understanding of laser–plasma interactions that was obtained before the declassification of laser-induced compression in the early 1970s and continues with the compression experiments using infrared lasers in the late 1970s that produced thermonuclear neutrons. The problem of suprathermal electrons and the target preheat that they caused, associated with the infrared laser wavelength, led to lasers being built after 1980 to operate at shorter wavelengths, especially 0.35 μm—the third harmonic of the Nd:glass laser—and 0.248 μm (the KrF gas laser). The main physics areas relevant to direct drive are reviewed. The primary absorption mechanism at short wavelengths is classical inverse bremsstrahlung. Nonuniformities imprinted on the target by laser irradiation have been addressed by the development of a number of beam-smoothing techniques and imprint-mitigation strategies. The effects of hydrodynamic instabilities are mitigated by a combination of imprint reduction and target designs that minimize the instability growth rates. Several coronal plasma physics processes are reviewed. The two-plasmon–decay instability, stimulated Brillouin scattering (together with cross-beam energy transfer), and (possibly) stimulated Raman scattering are identified as potential concerns, placing constraints on the laser intensities used in target designs, while other processes (self-focusing and filamentation, the parametric decay instability, and magnetic fields), once considered important, are now of lesser concern for mainline direct-drive target concepts. Filamentation is largely suppressed by beam smoothing. Thermal transport modeling, important to the interpretation of experiments and to target design, has been found to be nonlocal in nature. Advances in shock timing and equation-of-state measurements relevant to direct-drive ICF are reported. Room-temperature implosions have provided an increased understanding of the importance of stability and uniformity. The evolution of cryogenic implosion capabilities, leading to an extensive series carried out on the 60-beam OMEGA laser [Boehly et al., Opt. Commun. 133, 495 (1997)], is reviewed together with major advances in cryogenic target formation. A polar-drive concept has been developed that will enable direct-drive–ignition experiments to be performed on the National Ignition Facility [Haynam et al., Appl. Opt. 46(16), 3276 (2007)]. The advantages offered by the alternative approaches of fast ignition and shock ignition and the issues associated with these concepts are described. The lessons learned from target-physics and implosion experiments are taken into account in ignition and high-gain target designs for laser wavelengths of 1/3 μm and 1/4 μm. Substantial advances in direct-drive inertial fusion reactor concepts are reviewed. Overall, the progress in scientific understanding over the past five decades has been enormous, to the point that inertial fusion energy using direct drive shows significant promise as a future environmentally attractive energy source.
High-resolution spectrometry of charged particles from inertial-confinement-fusion ͑ICF͒ experiments has become an important method of studying plasma conditions in laser-compressed capsules. In experiments at the 60-beam OMEGA laser facility ͓T. R. Boehly et al., Opt. Commun. 133, 495 ͑1997͔͒, utilizing capsules with D 2 , D 3 He, DT, or DTH fuel in a shell of plastic, glass, or D 2 ice, we now routinely make spectral measurements of primary fusion products ͑p, D, T, 3 He, ␣͒, secondary fusion products ͑p͒, ''knock-on'' particles ͑p, D, T͒ elastically scattered by primary neutrons, and ions from the shell. Use is made of several types of spectrometers that rely on detection and identification of particles with CR-39 nuclear track detectors in conjunction with magnets and/or special ranging filters. CR-39 is especially useful because of its insensitivity to electromagnetic noise and its ability to distinguish the types and energies of individual particles, as illustrated here by detailed calibrations of its response to 0.1-13.8 MeV protons from a Van de Graaff accelerator and to p, D, T, and ␣ from ICF experiments at OMEGA. A description of the spectrometers is accompanied by illustrations of their operating principles using data from OMEGA. Sample results and discussions illustrate the relationship of secondary-proton and knock-on spectra to capsule fuel and shell areal densities and radial compression ratios; the relationship of different primary fusion products to each other and to ion temperatures; the relationship of deviations from spherical symmetry in particle yields and energies to capsule structure; the acceleration of fusion products and the spectra of ions from the shell due to external fields; and other important physical characteristics of the laser-compressed capsules.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.