In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370 o C to 1460 o C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370 o C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.