Poly(ethylene‐co‐vinyl acetate) (EVA‐25) and poly(ethylene‐co‐vinyl acetate‐co‐carbon monoxide) (EVACO‐2410) and their blends with EVACO:EVA ratios of 80:20, 60:40, 40:60, and 20:80 were foamed using CO2. These foams are of interest for applications ranging from footwear to medical devices. Foaming experiments were carried out using 1 mm thick melt‐extruded films in CO2 at a range of pressures (100, 200, and 300 bar) and temperatures (30, 40, 50, and 60 °C). Foamability of the polymers was explored both under isothermal and gradient temperature conditions. Foams of EVACO‐2410 displayed high initial expansions followed by postfoaming relaxation and shrinkage while foams generated from EVA‐25 showed more dimensional stability. Blending EVACO‐2410 with EVA‐25 was explored as an approach to reduce postfoaming relaxation and shrinkage. The surfaces of the foamed samples displayed blistering that was linked to CO2 bubble entrapment and coalescence at the surface. Scanning electron micrographs of the foams generated from blends displayed distinct morphologies reflecting whether the sections were representing the machine‐ or cross‐machine direction of extruded films. In going from EVACO‐2410 to EVA‐25, the cell densities ranged from about 106 to 1010 cells/cm3. Foams with low bulk densities of about 0.11 g/cm3 could be generated. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45841.

The advancement of click-functionalized hydrogels in recent years has coincided with rapid growth in the fields of mechanobiology, tissue engineering, and regenerative medicine. Click chemistries represent a group of reactions...

No abstract

Cellular mechanotransduction plays a central role in fibroblast activation during fibrotic disease progression, leading to increased tissue stiffness and reduced organ function. While the role of epigenetics in disease mechanotransduction...

Confined foaming of poly(ethylene-co-vinyl acetate-co-carbon monoxide) using carbon dioxide as a physical blowing agent in a mold with either permeable or impermeable boundaries has been explored as a strategy to control final foam dimensions and morphology. The results are discussed in terms of comparisons to free-foaming experiments conducted at the same pressure and temperature conditions following the same pressurization and depressurization paths. Foaming experiments were carried out at 30 and 40 C and 100, 200, and 300 bar followed by rapid depressurization of the foaming cell. Confined foaming led to smaller pores with more uniform distributions across the polymer cross-section. However, bulk foam densities of the foams generated under confinement were higher than those generated under the free-foaming mode. Surface characteristics and skin layer formation were altered by expansion against both the permeable and impermeable boundaries. Confined foaming promotes uniform pore distribution and overall dimensional uniformity and may impart surface texture but the trade-off is in the degree to which the bulk foam density can be lowered.