Cathode spot is the source of plasma and metal vapor which affects the breaking capacity of vacuum circuit breakers. In this paper, the cup-shaped axial magnetic field contacts were used and the images of cathode spots were obtained by an ultra high-speed camera in the experiment. The dynamic characteristics of cathode spots during expansion process in vacuum arc were investigated. Under the conditions of different current amplitudes, different distributions of cathode spots were observed. During the expansion process of cathode spot, there are group spots and individual spots. The group spot only occurs in the cold electrode. The electrons emission characteristics of cathode spot as a function of temperature and electric field was calculated. The formation of group spot is related to the current and electron emission of cathode spot. The cathode spots were identified by Matlab. It was found that the variation of number of cathode spots is consistent with the current. However, at different stages, the reasons for the increase in the number of cathode spots are different, such as the increase in the area of cathode spots in the initial arcing stage and the splitting of cathode spot. It was obversed that the cathode spots are not completely evenly distributed on the cathode surface. The farther away from the center of the contact, the longer the distance between the cathode spots. It is mainly effected by the transverse magnetic field which is generated by the arc column. The closer to the contact edge, the higher the transverse magnetic field at the cathode spot and the higher the expansion velocity of cathode spot.

No abstract