Graphene‐based materials have attracted significant attention in many technological fields, but scaling up graphene‐based technologies still faces substantial challenges. High‐throughput top‐down methods generally require hazardous, toxic, and high‐boiling‐point solvents. Here, an efficient and inexpensive strategy is proposed to produce graphene dispersions by liquid‐phase exfoliation (LPE) through a combination of shear‐mixing (SM) and tip sonication (TS) techniques, yielding highly concentrated graphene inks compatible with spray coating. The quality of graphene flakes (e.g., lateral size and thickness) and their concentration in the dispersions are compared using different spectroscopic and microscopy techniques. Several approaches (individual SM and TS, and their combination) are tested in three solvents (N‐methyl‐2‐pyrrolidone, dimethylformamide, and cyrene). Interestingly, the combination of SM and TS in cyrene yields high‐quality graphene dispersions, overcoming the environmental issues linked to the other two solvents. Starting from the cyrene dispersion, a graphene‐based ink is prepared to spray‐coat flexible electrodes and assemble a touch screen prototype. The electrodes feature a low sheet resistance (290 Ω □−1) and high optical transmittance (78%), which provide the prototype with a high signal‐to‐noise ratio (14 dB) and multi‐touch functionality (up to four simultaneous touches). These results illustrate a potential pathway toward the integration of LPE‐graphene in commercial flexible electronics.

Two-dimensional material (2DM) coatings exhibit complex and controversial interactions with biological matter, having shown in different contexts to induce bacterial cell death and contribute to mammalian cell growth and proliferation in vitro and tissue differentiation in vivo. Although several reports indicate that the morphologic and electronic properties of the coating, as well as its surface features (e.g., crystallinity, wettability, and chemistry), play a key role in the biological interaction, these kinds of interactions have not been fully understood yet. In this review, we report and classify the cellular interaction mechanisms observed in graphene and hexagonal boron nitride (hBN) coatings. Graphene and hBN were chosen as study materials to gauge the effect of two atomic-thick coatings with analogous lattice structure yet dissimilar electrical properties upon contact with living matter, allowing to discern among the observed effects and link them to specific material properties. In our analysis, we also considered the influence of crystallinity and surface roughness, detailing the mechanisms of interaction that make specific coatings of these 2DMs either hostile toward bacterial cells or innocuous for mammalian cells. In doing this, we discriminate among the material and surface properties, which are often strictly connected to the 2DM production technique, coating deposition and post-processing method. Building on this knowledge, the selection of 2DM coatings based on their specific characteristics will allow to engineer desired functionalities and devices. Antibacterial coatings to prevent biofouling, biocompatible platforms suitable for biomedical applications (e.g., wound healing, tissue repairing and regeneration, and novel biosensing devices) could be realized in the next future. Overall, a clear understanding on how the 2DM coating’s properties may modulate a specific bacterial or cellular response is crucial for any future innovation in the field.

In this work, we investigate the electronic transport properties of a graphene allotrope composed of 5–6-7 carbon aromatic rings called phagraphene and compare with the results of the transition-voltage spectroscopy (TVS) and propose the behavior at low voltage characteristic of a topological insulator. Phagraphene properties were compared to those of graphene in a zigzag nanoribbon configuration, zigzag graphene vs zigzag phagraphene nanoribbon (zzGNR and zzPGNR). The molecular geometry and the electronic properties were calculated by density functional theory (DFT) without spin, and the electronic transport and TVS were obtained by means of DFT combined with non-equilibrium Green´s function when we couple the optimized geometry of zzGNR and zzPGNR to the leads (left and right), forming the molecular junction that will be subjected to the action of an external bias voltage (Ve) to generate the molecular device. The results exhibit (i) a metal-insulator transition when Ve is increased until Ve = 1.4 V which corresponds to the nonlinear region (resonance), showing the field effect transistor behaviour for zzGNR junctions; and (ii) two nonlinear regions (two negative differential resistances), showing a resonant tunnel diode behaviour with two operation windows (Ve = 0.5 V and Ve = 1.7 V) for the zzPGNR junction. In addition, the zzPGNR junction exhibits topological insulator characteristics upon introducing topological defects such as pentagons and heptagons in the hexagonal lattice of graphene, and when Ve = 1.7 V, there occurs a topological insulator-metal transition that can be seen in the behaviour of the density of states, transmittance, and frontier molecular orbitals with Ve.

No abstract

No abstract