No abstract

Bluetooth Smart is the brand name for the Bluetooth low energy feature in the Bluetooth specification defined by the Bluetooth Special Interest Group. The standard Bluetooth radio has been widely implemented and available in mobile phones, notebook computers, audio headsets, and many other devices. The low-power version of Bluetooth is a specification that enables the use of this air interface with devices such as sensors, smart meters, appliances, etc. The lowpower variant of Bluetooth has been standardized since revision 4.0 of the Bluetooth specifications, although version 4.1 or newer is required for IPv6. This document describes how IPv6 is transported over Bluetooth low energy using IPv6 over Low-power Wireless Personal Area Network (6LoWPAN) techniques. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7668. Nieminen, et al.

The next wave driving the expansion of the Internet will come from the Internet of Things. Bluetooth LE is a rapidly emerging ultra-low-power radio technology expected to be incorporated in billions of IoT devices in the next few years. Consequently, it is particularly important to specify Internet connectivity solutions for Bluetooth LE. In this article we present such solutions based on the ongoing standardization work in the IETF and Bluetooth Special Interest Group. We prove the feasibility of a complete IP-based protocol stack on constrained devices and illustrate its performance, highlighting key trade-offs. In addition, we discuss gateway operation covering global IPv6 connectivity and proxy-cache functionality.Postprint (published version

SummaryThe development of Internet of Things (IoT) applications can be facilitated by encoding the meaning of the data in the messages sent by IoT nodes, but the constrained resources of these nodes challenge the common Semantic Web solutions for doing this. In this article, we examine enabling technologies for adding semantics to the IoT. Especially, we analyze data formats, which enable IoT applications consume semantic IoT data in a straightforward and general fashion, and evaluate resource usage of different alternatives with a sensor system. Our experiment illustrates encoding and decoding of different data formats and shows how big a difference a data format can make in energy consumption. Copyright © 2014 John Wiley & Sons, Ltd.

No abstract