There is a critical need for improved methane-oxidation catalysts to both reduce emissions of methane, a greenhouse gas, and improve the performance of gas turbines. However, materials that are currently available either have low activity below 400°C or are unstable at higher temperatures. Here, we describe a supramolecular approach in which single units composed of a palladium (Pd) core and a ceria (CeO(2)) shell are preorganized in solution and then homogeneously deposited onto a modified hydrophobic alumina. Electron microscopy and other structural methods revealed that the Pd cores remained isolated even after heating the catalyst to 850°C. Enhanced metal-support interactions led to exceptionally high methane oxidation, with complete conversion below 400°C and outstanding thermal stability under demanding conditions.

Depletion of crude oil resources and environmental concerns have driven a worldwide research on alternative processes for the production of commodity chemicals. Fischer-Tropsch synthesis is a process for flexible production of key chemicals from synthesis gas originating from non-petroleum-based sources. Although the use of iron-based catalysts would be preferred over the widely used cobalt, manufacturing methods that prevent their fast deactivation because of sintering, carbon deposition and phase changes have proven challenging. Here we present a strategy to produce highly dispersed iron carbides embedded in a matrix of porous carbon. Very high iron loadings (440 wt %) are achieved while maintaining an optimal dispersion of the active iron carbide phase when a metal organic framework is used as catalyst precursor. The unique iron spatial confinement and the absence of large iron particles in the obtained solids minimize catalyst deactivation, resulting in high active and stable operation.

Photocatalytic pathways could prove crucial to the sustainable production of fuels and chemicals required for a carbon-neutral society. Electron−hole recombination is a critical problem that has, so far, limited the efficiency of the most promising photocatalytic materials. Here, we show the efficacy of anisotropy in improving charge separation and thereby boosting the activity of a titania (TiO 2 ) photocatalytic system. Specifically, we show that H 2 production in uniform, one-dimensional brookite titania nanorods is highly enhanced by engineering their length. By using complimentary characterization techniques to separately probe excited electrons and holes, we link the high observed reaction rates to the anisotropic structure, which favors efficient carrier utilization. Quantum yield values for hydrogen production from ethanol, glycerol, and glucose as high as 65%, 35%, and 6%, respectively, demonstrate the promise and generality of this approach for improving the photoactivity of semiconducting nanostructures for a wide range of reacting systems.titania | brookite | photocatalysis | photoreforming | hydrogen

No abstract

No abstract