Fibrous material with high strength and large stretchability is an essential component of high‐performance wearable electronic devices. Wearable electronic systems require a material that is strong to ensure durability and stability, and a wide range of strain to expand their applications. However, it is still challenging to manufacture fibrous materials with simultaneously high mechanical strength and the tensile property. Herein, the ultra‐robust (≈17.6 MPa) and extensible (≈700%) conducting microfibers are developed and demonstrated their applications in fabricating fibrous mechanical sensors. The mechanical sensor shows high sensitivity in detecting strains that have high strain resolution and a large detection range (from 0.0075% to 400%) simultaneously. Moreover, low frequency vibrations between 0 and 40 Hz are also detected, which covers most tremors that occur in the human body. As a further step, a wearable and smart health‐monitoring system has been developed using the fibrous mechanical sensor, which is capable of monitoring health‐related physiological signals, including muscle movement, body tremor, wrist pulse, respiration, gesture, and six body postures to predict and diagnose diseases, which will promote the wearable telemedicine technology.

Summary The two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising flexible electronic materials for strategic flexible information devices. Large-area and high-quality patterned materials were usually required by flexible electronics due to the limitation from the process of manufacturing and integration. However, the synthesis of large-area patterned 2D TMDs with high quality is difficult. Here, an efficient and powerful pulsed laser has been developed to synthesize wafer-scale MoS 2 . The flexible strain sensor was fabricated using MoS 2 and showed high performance of low detection limit (0.09%), high gauge factor (1,118), and high stability (1,000 cycles). Besides, we demonstrated its applications in real-time monitoring of health-related physiological signals such as radial artery pressure, respiratory rate, and vocal cord vibration. Our findings suggest that the laser-assisted method is effective and capable of synthesizing wafer-scale 2D TMDs, which opens new opportunities for the next flexible electronic devices and wearable health monitoring.

This work proposes a design, fabrication, and characterization of flexible temperature sensors using temperature-sensitive materials, which are applied using a drop coating method. Temperature-sensitive materials were fabricated by mixing poly­(3,4-ethylenedioxythiophene):poly­(styrenesulfonate) with polyaniline (PEDOT:PSS/PANI). The temperature coefficient of resistance reached −0.803%/°C. Moreover, the detection resolution reached 0.1 °C and had a fast response time of 200 ms. In addition, the sensor can sense spatial temperatures. The sensor has the advantages of low cost, a simple preparation process, and the potential to be used in medical rehabilitation and early disease prevention.

Flexible and wearable pressure sensors attached to human skin are effective and convenient in accurate and real-time tracking of various physiological signals for disease diagnosis and health assessment. Conventional flexible pressure sensors are constructed using compressible dielectric or conductive layers, which are electrically sensitive to external mechanical stimulation. However, saturated deformation under large compression significantly restrains the detection range and sensitivity of such sensors. Here, we report a novel type of flexible pressure sensor to overcome the compression saturation of the sensing layer by soft-strain effect, enabling an ultra-high sensitivity of ~636 kPa −1 and a wide detection range from 0.1 kPa to 56 kPa. In addition, the cyclic loading-unloading test reveals the excellent stability of the sensor, which maintains its signal detection after 10,000 cycles of 10 kPa compression. The sensor is capable of monitoring arterial pulse waves from both deep tissue and distal parts, such as digital arteries and dorsal pedal arteries, which can be used for blood pressure estimation by pulse transit time at the same artery branch.