The reservoir in the Central Tarim Basin is a typical high-pressure fracture-vuggy carbonate reservoir with high temperatures, which easily leads to drilling fluid losses and the high-temperature carbonate. The conventional lost circulation materials (LCMs) cannot meet the reservoir. To resolve this problem, a rigid particle with high-temperature resistance, high acid solubility, and high rigidity was developed, tested, and evaluated. According to bridge rules of 1/2–2/3 opening degree of formation fracture, the formulation experiments of GZD and other lost circulation materials were conducted and a novel composite lost circulation material (LCM) was completed. Lastly, we investigated the compatibility of LCM and mud in site though compatibility experiment, analyzed the plugging effect of the system for fracture and vuggy by laboratory static lost circulation simulation and evaluation and sand-bed plugging experiments, respectively. The results show that compared with the conventional rigid lost material, the value of high-temperature resistance is more and acid solubility is over 98%. Also, it can work well with other fiber materials (E), variable filling particles (F and G), and superfine filling particles (H) and form a novel plugging material, named MGY-I, whose temperature resistance value is more than 473.15 K, the bearing strength is over than 9 MPa, the mud filtrate invasion depth of sand bed made from coarse particles (10∼20 mesh) is only 3.0 cm within 30 minutes, and the invasion depth is less than 1 cm within 30 minutes when the sand bed is made from 80∼100 mesh. The optimal concentrations of rigid granule, lignin fiber, elastic particle, and superfine calcium carbonate are 8% (A : B : CD = 2 : 1 : 1), 0.5%, 6%, and 1%, respectively. And, the plugging function of “GZD-rigidity bridge and filling, fiber network and deformable filing” is better exerted on the formation fracture with a high loading capacity and a high-temperature resistance.

No abstract

No abstract

No abstract

With the development of oil exploration, the number of complex situations encountered in the drilling process is continuously increasing. During the operation of large displacement and horizontal wells, the safe density window of drilling fluid is narrow in complex formations and the lost circulation problem is becoming increasingly prominent. This can easily cause the drilling fluid to enter the formation from inside the well through lost circulation channels, which will prolong the drilling cycle, increase drilling costs, affect geological logging, and could cause a series of malignant accidents (such as blowout, sticking of a drilling tool, borehole collapse, and well abandoned). According to the severity, common lost circulation can be classified into three types: fractured lost circulation, karst cave lost circulation, and permeability lost circulation. Currently, researchers are developing different types of lost circulation materials (LCMs) for various lost circulation situations. Compared with conventional lost circulation control methods, the polymer gel lost circulation control technique applies a three-dimensional cage-like viscoelastic body formed via the crosslinking reaction of polymer gels. These materials have strong deformability and can enter fractures and holes through extrusion and deformation without being restricted by lost circulation channels. They then settle in the lost circulation formation and form a plugging layer through a curing reaction or swelling effect. Among the polymer gel LCMs, high-temperature resistant polymer gels can either be used alone or in combination with other LCMs, bringing the advantages of adjustable gelation time, strong lost circulation control ability, and strong filtration ability of the plugging slurry. Moreover, they are suitable for the lost circulation control of microporous leaky layer and have limited influence on the performance of drilling fluids. Therefore, the high-temperature resistant polymer gel lost circulation control technique is increasingly becoming a hot spot in the research of LCMs nowadays. This paper summarizes the research progress into high-temperature resistant functional gels for profile control and water shutoff, lost circulation prevention and control, and hydraulic fracturing. Furthermore, the current application status of high-temperature resistant gels and high-temperature resistant gel temporary plugging agents is demonstrated, followed by a detailed overview of the gel-breaking methods. Overall, this research lays the theoretical foundation for the application and promotion of high-temperature resistant gels.