Abstract--The physics program of any next step tokamak such as FIRE sets demands for plasma measurement which are at least as comprehensive as on present tokamaks, with the additional capabilities needed for control of the plasma and for understanding the effects of the alpha-particles. The diagnostic instrumentation must be able to provide the fine spatial and temporal resolution required for the advanced tokamak plasma scenarios. It must also be able to overcome the effects of neutron-and gamma-induced electrical noise in ceramic components or detectors, and fluorescence and absorption in optical components. There are practical engineering issues of minimizing radiation streaming while providing essential diagnostic access to the plasma. Many diagnostics will require components at or close to the first wall, e.g. ceramics and MI cable for magnetic diagnostics and mirrors for optical diagnostics; these components must be mounted to operate, and survive, in fluxes which require special material selection. A better set of diagnostics of alpha-particles than that available for TFTR is essential; it must be qualified well before moving into D-T experiments. A start has been made to assessing the potential implementation of key diagnostics for the FIRE device. The present status is described.