A significant increase in traffic intensity and increased axle loads of vehicles on the roads led to the fact that asphalt concrete is not able to provide the required durability of road surfaces. The durability of asphalt concrete pavements is directly related to the quality of the materials used, primarily bitumen. Bitumen is most susceptible to changes under the influence of traffic loads and weather conditions. At the same time, bitumen largely determines the condition of the road surface. The behavior of bitumen can be changed by modifying it with additives. The novelty of bitumen modification lies in the fact that the addition of polymer to bitumen makes it possible to obtain a road surface that is resistant to cracking at low temperatures and to provide fatigue strength at high temperatures. Rutting resistance is also achieved. An important role in the choice of the modifier is played by economic issues related to the rise in the cost of coating, as well as the need to use additional equipment, the stability of the modified binder during storage and transportation, etc. Carbon nanotubes (CNTs) were used as a modifier for asphalt concrete mixtures. During the experiment, a significant improvement in the main indicators of asphalt concrete mixtures was revealed, as well as the maximum permissible deviations for the amount of binder in the asphalt concrete mixture and for the main indicators were observed. Moreover, the most important thing that has been achieved is a significant increase in rutting resistance by rolling a loaded wheel.