Abstract:One of the most popular types of foundations in layered subsoil with very differentiated soil shear strengths are precast piles. One of the reasons is the fact that we can well control the driving process during the installation of these piles. The principles of the assessment of bearing capacity and settlements of the piles given by Eurocode 7, concentrate on two main methods, i.e., Static Pile Load Tests (SPLT) and Dynamic Driving Analysis (PDA). However, the evaluation of real load-settlement curve for piles being driven in layered subsoil, where noncohesive and cohesive soils occur alternately, is neither easy nor straightforward. In the paper, the results of both SPLT and PDA tests for objects on the highways in Poland are presented. Field investigations carried out at various time points since the installation of piles (from 7 to 90 days) revealed an increase of bearing capacity with time. The reason for this may be a change of the soil state near the piles due to their driving (displacement of piles) as well as a change of microstructure at the contact between soil and pile shaft. The results of load tests were referred to the geotechnical parameters of the subsoil, which was recognized by means of traditional borings and CPTU tests. The results of tests allow phenomena occurring with time to be assessed and bearing capacity of precast piles to be predicted.

No abstract

No abstract

The paper presents technological changes concerning not only the method of construction, but also the materials used. Another aspect is the methods of calculating the load-bearing capacity and settlement of piles. With acceptance for use the PN-EN:1997-1:2008 standard in 2010, it was necessary to change the approaches applied that based on many years of experience and tradition. The best method in this case is to forecast the full load-settlement characteristics. On the basis of the collected data, a comparative analysis of particular displacement piles technologies was made. The usefulness of individual methods of load-bearing capacity calculation depending on the pile technology was determined.

No abstract