No abstract

Automatic transmission fluid (ATF) is used for automatic transmissions in the vehicle as the characterized fluid. Recently, the vehicle manufacture usually guarantee for fluid change over 80000~100000 km mileage or no exchange, but most drivers usually change ATF below every 50000 km driving in Republic of Korea. It can cause to raise environmental contamination by used ATF and increase the cost of driving by frequently ATF change.In this study, we investigate the various physical properties such as flash point, fire point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and metal component concentration for fresh and used ATF after driving (50000 km, 100000 km). The result showed that the total acid number, pour point, Fe, Al and Cu component had increased than fresh ATF, but 2 kind of used oil (50000 km and 100000km) had similar physical values and metal component concentration

-Because food crops serve as the raw materials for biodiesel, the increasing use of biodiesel as an alternative fuel can lead to adverse effects such as food price inflation and may contribute to global starvation. To solve these problems, efforts are being made to explore various nonedible raw materials for producing biodiesel. Different raw materials impart different fuel characteristics to biodiesel. In this study, we synthesized pure fatty acid methyl ester (FAME), which is a biodiesel component, and then analyzed its fuel properties. The fuel properties of pure FAME would be useful in producing biodiesel from various new raw materials.Keywords − biodiesel (바이오디젤), fatty acid (지방산), fatty acid methyl ester (지방산 메틸에스테르), fuel properties (연료특성)

− Alcohol components are illegally mixed with petroleum products for tax evasion purposes, but this degrades vehicle performance. The alcohol content in petroleum fuel can be analyzed by gas chromatography. However, this technique requires a long analysis time and is expensive. CrO3, also known as Jones reagent, changes color upon reaction with an alcohol. In this study, therefore, we analyze alcohol contents in vehicle fuel by using CrO3 aqueous solution.

-The engine oil is used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in korea. It can cause to raise environmental contamination by used engine oil and increase the cost of driving by frequently oil change.In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator characteristics, total acid number, four-ball test and concentration of metal component for fresh engine oil and used engine oil after real vehicle driving (5000 km, 10000 km). The result showed that the total acid number, wear scar diameter by four-ball test, Fe and Cu had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000km) had similar physical values and concentration of metal component .