No abstract

In this paper, we designed and developed a novel internal compact printed loop antenna for WWAN/WLAN/ISM/LTE smartphone applications. The proposed antenna is composed of a meander loop antenna and a capacitively coupled feeding line. It has a planar structure, with an overall dimension of 120 × 60 mm2, the antenna portion occupying a size of 20 × 60 mm2, which makes it suitable for practical smartphone applications. The results of our measurement reveal that the prototype antenna can provide two wide frequency bands of 712–1078 and 1757–2930 MHz, which cover multi-band for GSM850/GSM900/DCS1800/PCS1900/UMTS2100/IMT2000/WLAN2400/ISM2450/LTE700/LTE2300/ LTE2500. The antenna also shows good radiation characteristics and gain peaks for frequencies over the desired operating bands. We also studied the specific absorption rate (SAR) of the proposed antenna placed at the bottom of a mobile phone. The obtained SAR values are all below the SAR limit of 1.6 W/kg for the 1 g head tissue and 2.0 W/kg for the 10 g head tissue. We used CST Microwave Studio and Ansoft HFSS for the simulation and the design of the antenna and present in this paper the details of the design considerations, as well as the results on the reflection coefficient, the surface current distributions, the radiation characteristics, and the gain of the proposed antenna.

In this paper, a novel low-profile planar monopole internal antenna for GSM/DCS/PCS/ IMT/UMTS/WLAN/ISM/LTE operation in the mobile phones is designed and developed. The proposed antenna is composed of multi-branches, F-shaped slots in the system ground plane and tapered feeding line which can improve the impedance matching at the feeding point. The antenna occupying a small area of 18.5 × 46 mm2 is placed on the top no-ground portion of the system circuit board, which makes it suitable for practical mobile applications. A prototype of the proposed antenna is fabricated and tested. In addition, the planar monopole antenna can provide two wide lower and upper bands to respectively cover the frequency range of 848–1152 MHz, and 1736–3000 MHz, for the GSM850/GSM900/DCS1800/PCS1900/IMT2000/UMTS2100/WLAN2400/ISM2450/LTE2300/LTE2500 operation in the mobile phone. Good radiation patterns and antenna peak gain for frequencies over the operating bands have been observed. The antenna is simulated and designed by using Ansoft HFSS and CST Microwave Studio. Details of the antenna design, results on the reflection coefficient, radiation characteristics, directivity, antenna gain, realized gain, and efficiency of the antenna are given and discussed. Finally, the specific absorption rate (SAR) of the proposed antenna placed at the bottom of the mobile phone is also investigated. The obtained SAR values meet the limit of 1.6 W/kg for the 1 g head tissue and 2.0 W/kg for the 10 g head tissue.

No abstract

No abstract