The main objective of this study was to synthesize a nanocomposite using graphene and manganese ferrite nanoparticles (MnFe2O4-G) and to evaluate its antibacterial activity for water treatment purposes. Its morphological characteristics were evaluated by instrumental techniques, such as scanning electron microscopy and transmission electron microscopy. The characterization results indicated that the nanocomposite presented nanoparticles of approximately 25 nm well dispersed in transparent and large (14 μm) graphene nanosheets. The antibacterial activity was evaluated in a batch experiment using a concentration of 40 μg mL-1 of nanocomposite (MnFe2O4-G, bare MnFe2O4 nanoparticles or graphene oxide), 1x105 CFU mL-1 of Escherichia coli, and 8 h of contact time at room temperature. The highest antibacterial capacity was observed for the hybrid nanocomposite (91.91%), due to the synergic effect of graphene and MnFe2O4 nanoparticles. Various mechanisms were proposed to explain the effective antibacterial activity of MnFe2O4-G, such as wrapping, oxidative stress, sharp-edge cutting effect, among others. The results showed that MnFe2O4-G is a potential alternative in water treatment processes as an antibacterial agent.

The present research aimed to evaluate the photocatalytic activity of reduced graphene oxide and manganese ferrite nanocomposite supported on eucalyptus wood ash waste (WA) from industrial boilers, for the decolorization of methylene blue (MB) solutions, using sunlight as an irradiation source. For this, the photocatalyst named MnFe2O4-G@WA was synthesized by a solvothermal method and characterized by analyzes of scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer–Emmett–Teller and zeta potential. Firstly, the photocatalyst was evaluated for photocatalytic decolorization of MB under different reaction conditions. Then, the influence of pH, photocatalyst dose and H2O2 was evaluated. MnFe2O4-G@WA showed 94% of efficiency for photocatalytic decolorization of MB under operating conditions of solar irradiation, 0.25 g/L of catalyst, 300 mg/L of H2O2. The proposed degradation reaction mechanism suggested that the photodegradation of MB was through a synergistic mechanism of photocatalysis and photo-Fenton reactions, with the combined action of the three materials used. The data adjusted to the first order kinetics from the Langmuir–Hinshelwood model. In addition, MnFe2O4-G@WA showed high stability, maintaining its efficiency above 90% after 5 cycles. The results indicated that the nanophotocatalyst is a potential technology for the decolorization of MB solutions.