No abstract

No abstract

ABSTRACT--The concept, methodology and instrumentation for hybrid experimental-numerical residual stress analysis in a laser weldment are presented. Grating intefferometry and digital speckle photography are applied as complementary experimental methods for the determination of the initial model of residual strains and of the material properties at the vadous zones of a laser weldment. These data inserted into a finite element model enable one to analyze the formation of the residual stress state of the object, which is compared and modified by means of experimental data in a closed iterative loop. This full hybrid approach is tested successful!y on a laser-welded steel specimen in uniaxial tensile tests.

Determination of a phase correction is necessary when making interferometric measurements of gauge blocks with an auxiliary platen. The phase correction compensates for the differences in the reflecting properties of the gauge block and the platen surfaces. Different phase corrections are reported for gauge blocks of different manufacturers, made from different materials and with different surface roughness compared to the platen. In this paper, the process of selection of the best surface roughness parameter and the influence of different complex refractive indices of the same type of material are analysed. The new surface roughness parameter based on the difference between the weighted mean of maximum and minimum asperities of 3D surface roughness measured by a modernized Linnik phase shifting interferometer is introduced. The results of comparison of the phase correction values calculated from the difference between the weighted mean values and calculated from stack method measurements are presented and discussed. The complementary method of phase correction measurement based on the cross-wringing method with the use of the modernized phase shifting Kösters interferometer is proposed.

No abstract