We applied a mud pulse signal to transmit the downhole measured parameters in a Logging While Drilling (LWD) system. The high-data-rate mud pulse signal was almost completely overwhelmed by noise and difficult to be identified because of the narrow pulse width, impacts of the pump noise, and the reflected wave. The wavelet transform’s multiresolution is suitable for signal denoising. In this paper, during the denoising process of the wavelet transform, we used a series of evaluation parameters to select the optimal parameter combination for denoising a mud pulse signal. We verified the feasibility of the wavelet transform denoising algorithm by analysing and processing an operational high-data-rate mud pulse signal. The decoding algorithm was available by applying self-correlation and bit synchronization. The application results through a field application showed that the processing algorithm was suitable for the high-data-rate mud pulse signal’s process.

No abstract

No abstract

The development of unconventional oil and gas resources is critically dependent on accurate geosteering of horizontal wells. A new type of LWD Azimuthal Laterolog Resistivity logging tool has been introduced that is specifically designed for geosteering and formation evaluation in complex carbonates, shale-gas, shale-oil, and coal-bed methane formations.The new tool is able to detect approach to a distant parallel bed-boundary of contrasting resistivity that is either higher or lower than the borehole environment. This enables predictive geosteering if the tool is not installed too far from the drill-bit. Conventional wave-propagation tools respond mainly to nearby conductive anomalies, which can limit their application in geosteering shale-oil wells where the target formation is often lower resistivity than those on upper or lower boundaries, or when the borehole traverses a fault and the target formation is higher resistivity and located in an unknown direction.Laterolog types of tools are capable of accurate measurement over a wide range of resistivity from 0.2 -20,000 ohm.meters, enabling hydrocarbon saturation calculation even in tight carbonate formations.Many carbonate formations, and most coal seams, produce from natural fractures or vugs. The new tool has thin-bed resolution of 0.14 meters, enabling it to image the more productive zones for real-time production analysis while drilling, with significant potential cost-savings.The GRT tool has been commercial for two years, accumulating several thousands of hours of drilling time in operations provided by several independent MWD service companies. Successful geosteering jobs have been completed in the Montney, Bakken, Viking (Canada), Niobrara, and Avalon (USA) unconventional formations. The first test in China was in Talimu Oilfield, where the new tool was able to reproduce logs from a wireline Dual Laterolog in resistivities ranging from 20,000 -100,000 ohm.meters. Tests have also been run in Tuha and Changqing (Sulige) oil and gas fields.A description of the tool operating theory, design objectives, unique real-time geosteering display, and logging software is presented. Some results from three years of operations in North America and China will be discussed along with logs and brief case studies.

No abstract