No abstract

The surface morphology of Li metal anode significantly dictates the stability and safety of Li metal batteries. The key parameters for morphological control and causes for dendritic growth of Li anode are still not clear. Although the plating kinetics is generally believed to be associated with Li growth habits, the detailed models are still not well defined. In this work, the temperature effect on the stability and efficiency of Li anode is systematically investigated in a variety of electrolyte composition for Li metal batteries. A dendrite‐free growth mechanism is observed, and a high Coulombic efficiency up to ≈99.4% in Li||Cu cells is achieved by tuning the deposition behaviors at elevated temperatures. The results provide insights into the Li dendrite growth mechanism and general principle for developing stable Li anode.

Delivery of accurate intensity‐modulated radiation therapy (IMRT) or stereotactic radiotherapy depends on a multitude of steps in the treatment delivery process. These steps range from imaging of the patient to dose calculation to machine delivery of the treatment plan. Within the treatment planning system's (TPS) dose calculation algorithm, various unique small field dosimetry parameters are essential, such as multileaf collimator modeling and field size dependence of the output. One of the largest challenges in this process is determining accurate small field size output factors. The Radiological Physics Center (RPC), as part of its mission to ensure that institutions deliver comparable and consistent radiation doses to their patients, conducts on‐site dosimetry review visits to institutions. As a part of the on‐site audit, the RPC measures the small field size output factors as might be used in IMRT treatments, and compares the resulting field size dependent output factors to values calculated by the institution's treatment planning system (TPS). The RPC has gathered multiple small field size output factor datasets for X‐ray energies ranging from 6 to 18 MV from Varian, Siemens and Elekta linear accelerators. These datasets were measured at 10 cm depth and ranged from 10×10 cm2 to 2×2 cm2. The field sizes were defined by the MLC and for the Varian machines the secondary jaws were maintained at a 10×10 cm2. The RPC measurements were made with a micro‐ion chamber whose volume was small enough to gather a full ionization reading even for the 2×2 cm2 field size. The RPC measured output factors are tabulated and are reproducible with standard deviations (SD) ranging from 0.1% to 2.4%, while the institutions' calculated values had a much larger SD range, ranging up to 7.9%. The absolute average percent differences were greater for the 2×2 cm2 than for the other field sizes. The RPC's measured small field output factors provide institutions with a standard dataset against which to compare their TPS calculated values. Any discrepancies noted between the standard dataset and calculated values should be investigated with careful measurements and with attention to the specific beam model.PACS number: 87.53.Bn

No abstract

Aqueous rechargeable zinc-manganese dioxide (Zn-MnO2) batteries are considered as one of the most promising energy storage devices for large scale-energy storage systems due to their low cost, high safety, and environmental friendliness. However, only a few cathode materials have been demonstrated to achieve stable cycling for aqueous rechargeable Zn-MnO2 batteries. Here, we report a new material consisting of hollow MnO2 nanospheres, which can be used for aqueous Zn-MnO2 batteries. The hollow MnO2 nanospheres can achieve high specific capacity up to ~405 mAh g−1 at 0.5 C. More importantly, the hollow structure of birnessite-type MnO2 enables long-term cycling stability for the aqueous Zn-MnO2 batteries. The excellent performance of the hollow MnO2 nanospheres should be due to their unique structural properties that enable the easy intercalation of zinc ions.