The article presents a study of the physical and technical properties of ash and slag waste Coal Power Plant. The main problem when using ash-slag mixtures is the variability of the particle size distribution of the material. Determining the characteristics of slag stored in the dumps of thermal power plants will help to choose the separation methods of this material, to address the disposal and accumulation of industrial waste, to expand the scope of their application. The obtained research results of physical and technical properties of waste of the Coal TPP testify to wide potential in the further use in many branches of the industry. Possible applications include fillers for concrete, materials for sandblasting (abrasive material), raw materials for the metallurgical industry, additives for the manufacture of binders, etc.

The article deals with the assessment problems of especially essential structures. Increased demands on prevention of emergency situations and minimizing the consequences in the event of their occurrence require constant determination of especially essential structures condition. Achieving the goal of reliability and continuity of information is possible by coating the structure surface by a layer of electroconductive concrete, working as a monitoring system sensor. The study of the electrical properties of concrete was performed using the voltmeter – ammeter scheme. After the measurements had been made, the conditional electrical resistance of the electrode pair was calculated. The analysis of the above dependencies found that the change in the electrical resistance of the material from its stress approaches the linear law at lower values of W/C over a larger section of the studied interval. Processing of the obtained data showed that the measurement results were significantly affected by the shape and size of the electrodes used during the experiments.