In this paper, we present two design methods to improve the performance of disk resonator gyroscope (DRG), including decreasing the frequency split and increasing the quality factor (Q). The structure parameters, which can affect the frequency split and Q value were concluded with the help of the FEM software. Meanwhile, devices with different parameters were designed, fabricated, and tested, and the experimental result was in accordance with the simulation. With the proposed methods, the DRG was selected with a high Q value and a low frequency split to satisfy the demand of high performance. The weakness and future works were pointed at last.

In this paper, we present a new design for a micro-opto-electro-mechanical (MOEMS) gyroscope based on a whispering-gallery mode (WGM) microdisk resonator and MEMS resonator. The mechanical characteristics, frequency split, and quality factor (Q) of the MEMS resonator; the optical characteristics, Q value, and coupling regimes of the WGM resonator; and the coupling between the two resonators were analyzed. Its operation principle—the transformation process from angular velocity to the resonance wavelength of the WGM resonator—is presented at same time. Next, the analysis conclusions were validated with the help of simulations in ANSYS and FDTD (Finite-Difference Time-Domain) Solutions. Afterwards, some key specifications were estimated based on the results of simulations. Lastly, the fabrication process is detailed.