No abstract

The influence of dodecylamine acetate (DDA) and myristyl trimethyl ammonium chloride (1431) on the flotation behavior of muscovite and kaolinite were studied in this paper. The condition which can efficiently separate the muscovite and kaolinite was found out: 5×10-5mol·L-1~1×10-4mol·L-11431 as collector and pH=5.The feasibility of flotation separation in this condition was validated by artificial mixed minerals separation test. The results of zeta potential measurement, infrared spectrum analysis and adsorption quantity test show that 1431 was adsorbed on the surface on muscovite and kaolinite by static electricity adsorption. The difference of adsorption quantity was consistent with results of the single mineral flotation test.

Traditional measurement and modern SEM-based mineral liberation analysis (MLA) system were employed to obtain the process mineralogy characteristic of Jinshan gold ore which had high Au (6.20g/t) and low sulfide (0.25%). XBSE, XBSE_STD and SPL_Lt MLA modes are used in this case, which make the results timely, reliable and quantitative. The gold behaves irregular granular native gold or silver-bearing native gold of which the Au content ranging from 93%to 100%. Gold mainly occurred as liberated or in gold-carrying gangue minerals, such as quartz and biotite,rarely in pyrite in the form of fissure gold, inter-crystalline gold or inclusion gold . The particle size of the Gold minerals range from 0.001mm to 0.010mm , which is too fine to recover from beneficiating method. Combined process should be adopted.

This paper determined the total absorbance of phosphorus molybdenum blue and arsenic molybdenum blue by using the additive property of their absorbance values. By eliminating the interference of arsenic by reduction masking with composite reducing agent Na2SO3-Na2S2O3-KBr, the absorbance of phosphorus could be obtained. Thus, the content of phosphorus and arsenic could be calculated, respectively. The results show that the work curves of this method for phosphorus and arsenic are consistent with Beer’s law when the content of phosphorus and arsenic is 0-0.60ug/mL and 0-2.00ug/mL, respectively. The standard addition recovery rate of phosphorus and arsenic is 98.80%-101.04% and 99.00%-101.50%, respectively. The relative standard deviation of phosphorus and arsenic is less than 4.0% with good accuracy and precision. This method is simple and fast to determine phosphorus and arsenic in molybdenum concentrate, and the results are accurate and reliable.

Process mineralogy research of a mixed copper ore is studied to identify the occurrence mode of copper and to analyze the mineralogical factors influencing the floatation results. The results show that the ore has features of "high-sulfur, high copper", "various copper mineral types", "fine copper mineral granularity" "disorderly copper mineral distribution", which belongs to the more difficult processing high sulfur mixed copper ore. Therefore, in order to effectively utilize the copper mine resource, floatation process or combination of floatation-hydrometallurgy process should be adopt.