No abstract

No abstract

No abstract

The anodic dissolution of copper was investigated at a copper RDE in the Lewis acidic and basic composition regions of the room-temperature AlCl3-EtMeImCl ionic liquid (IL) to assess the utility of chloroaluminate liquids as solvents for the electrochemical machining and electropolishing of copper. In the Lewis acidic IL (60 mol % AlCl3), the dissolution of Cu0 proceeds under mixed kinetic-mass transport control with an exchange current density of 7.00 mA cm−2 at 306 K and an apparent activation free energy of 19.7 kJ mol−1. A formal potential of 0.843 V was obtained for the Cu+/Cu0 reaction from potentiometric measurements. In the basic IL (< 50 mol % AlCl3), potentiometric measurements showed that the oxidation of Cu0 resulted in the formation of [CuCl2]−. In this case, the formal potential of the [CuCl2]−/Cu0 reaction is −0.412 V. At small positive overpotentials, the reaction exhibited mixed control and was first order in the chloride concentration, indicating that only a single Cl− is involved in the RDS. However, at more positive overpotentials, the reaction transitions to mass transport control, and a well-defined limiting current is observed for the anodization process. This limiting current scales linearly with the free chloride concentration in the IL.

Outgassing of volatile sulphur compounds from gypsum drywall from some sources has resulted in odours, corrosion of wiring and metals and health problems for homeowners. Infrared spectroscopy has been the primary analytical tool to identify 'problematic' drywall. In this paper, we demonstrate that elemental fingerprinting using inductively coupled plasma mass spectrometry and multivariate statistics is an effective alternative. The approach also showed potential in determining the geographic source of gypsum. Nineteen elements (Al, Ba, Ca, Cd, Co, Cr, Cs, Cu, Fe, Mg, Mn, Ni, Pb, Rb, Sr, Tl, U, V and Zn) were measured in 20 samples of drywall, half of which were classified as positive for contamination by Fourier Transform Infrared Spectroscopy. Gypsum from three different mines and a flue gas desulphurisation plant were also analysed. Principal component analysis and multivariate analysis of variance of the elemental data showed significant differences between the problematic and non-problematic drywall and between sources of gypsum. Strontium averaged 1800 ± 500 µg/g in problematic drywall compared to 400 ± 100 µg/g in non-problematic drywall (p < 0.0001).