Background External fixators are complex, expensive orthopaedic devices used to stabilize high-energy and complex fractures of the extremities. Although the technology has advanced dramatically over the last several decades, the mechanical goals for fracture stabilization of these devices have remained unchanged. Three-dimensional (3D) printing technology has the potential to advance the practice and access to external fixation devices in orthopaedics. This publication aims to systematically review and synthesize the current literature on 3D printed external fixation devices for managing orthopaedic trauma fractures. Methods The Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) protocols were followed for this manuscript with minor exceptions. PubMed, Embase, Cochrane Review, Google Scholar, and Scopus online databases were systematically searched. Two independent reviewers screened the search results based on predetermined inclusion and exclusion criteria related to 3D printing and external fixation of fractures. Results Nine studies met the inclusion criteria. These included one mechanical testing study, two computational simulation studies, three feasibility studies, and three clinical case studies. Fixator designs and materials varied significantly between authors. Mechanical testing revealed similar strength to traditional metal external fixators. Across all clinical studies, five patients underwent definitive treatment with 3D printed external fixators. They all had satisfactory reduction and healing with no reported complications. Conclusions The current literature on this topic is heterogeneous, with highly variable external fixator designs and testing techniques. A small and limited number of studies in the scientific literature have analyzed the use of 3D printing in this area of orthopaedic surgery. 3D printed external fixation design advancements have yielded promising results in several small clinical case studies. However, additional studies on a larger scale with standardized testing and reporting techniques are needed.

No abstract