An experimental study of C20, C25, C30, C40, and C50 big mobility concrete cubes that came from laboratory and construction site was completed. Nondestructive testing (NDT) was carried out using impact rebound hammer (IRH) techniques to establish a correlation between the compressive strengths and the rebound number. The local curve for measuring strength of the regression method is set up and its superiority is proved. The rebound method presented is simple, quick, and reliable and covers wide ranges of concrete strengths. The rebound method can be easily applied to concrete specimens as well as existing concrete structures. The final results were compared with previous ones from the literature and also with actual results obtained from samples extracted from existing structures.

No abstract

No abstract

The width of an abandoned roadway has a great influence on the roof stability of the working face. According to the coal seam conditions of the 30106 working face in the Sanyuan Shiku mine, the advance of a working face through an abandoned roadway was studied by using theoretical analysis, similar material simulation, numerical simulation, and field testing to determine the law of stope roof fracture migration, the stress distribution characteristics, and the variation in support resistance. Several conclusions are drawn: (1) The roof of the overlying strata is fractured at the edge of the abandoned roadway in front of the coal pillar and rotates downward due to the run-through of the plastic zone between the working face and abandoned roadway. (2) The hydraulic support working resistance gradually increases with decreasing coal pillar width between the working face and abandoned roadway, and the working resistance of the support tends to peak when the plastic zone extends to the coal, resulting in 3~4 times the normal recovery. Leakage occurred in front of the support in the caving zone. (3) The analysis of the relationship between the support and surrounding rock with the mechanical model for calculating the support load allows the derivation of the support working resistance formula for a working face passing through an abandoned roadway. (4) When the working face is excavated to expose the abandoned roadway, the shrinkage of the front column of the hydraulic support is significantly greater than that of the back column, and the stability is greatly reduced. This problem can be effectively solved when the uniaxial compressive strength of the backfill ≥2 MPa. (5) The engineering practice showed that the danger of leakage and roof fracture impact load was eliminated with the mining pressure reduction after reinforcement measures were taken in the abandoned roadway. The working face passed the abandoned roadway safely, providing the theoretical basis and guidance for coal remining under similar conditions.

No abstract