No abstract

Due to their exceptional strength properties combined with good workability the Advanced High-Strength Steels (AHSS) are commonly used in automotive industry. Manufacturing of these steels is a complex process which requires precise control of technological parameters during thermo-mechanical treatment. Design of these processes can be significantly improved by the numerical models of phase transformations. Evaluation of predictive capabilities of models, as far as their applicability in simulation of thermal cycles thermal cycles for AHSS is considered, was the objective of the paper. Two models were considered. The former was upgrade of the JMAK equation while the latter was an upgrade of the Leblond model. The models can be applied to any AHSS though the examples quoted in the paper refer to the Dual Phase (DP) steel. Three series of experimental simulations were performed. The first included various thermal cycles going beyond limitations of the continuous annealing lines. The objective was to validate models behavior in more complex cooling conditions. The second set of tests included experimental simulations of the thermal cycle characteristic for the continuous annealing lines. Capability of the models to describe properly phase transformations in this process was evaluated. The third set included data from the industrial continuous annealing line. Validation and verification of models confirmed their good predictive capabilities. Since it does not require application of the additivity rule, the upgrade of the Leblond model was selected as the better one for simulation of industrial processes in AHSS production.

No abstract

No abstract

Modeling of the transformation of the starting ferritic-pearlitic microstructure into austenite during heating in continuous annealing process was the objective of the work. Kinetics of this transformation was predicted by solving Avrami equation as well as carbon diffusion equation with a moving boundary. Mathematical and numerical models describing austenitic phase transformation were created for the 1D and 2D domains. Developed models were solved using the Finite Difference, as well as the Finite Element Method. Results of the numerical simulations include austenite volume fraction and carbon segregation profiles in the austenite. The former were compared with the experimental data obtained in laboratory simulations of the continuous annealing. Developed and validated model was applied to simulation of the austenitic transformation during annealing of DP steels.