In this paper, the fictitious radius - according to Neuber’s method for determination of stresses at the notch root was used. Next, the fatigue lives of elements of the ring notches were calculated, and then compared with results of experimental tests of S235JR steel samples. However, the obtained fatigue lives did not bring satisfactory results. It has been demonstrated that the fictitious radius strongly depends on the expected fatigue life

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.

In this work an investigation of internal structure influence on mechanical and fatigue properties of ferritic-pearlitic steels is shown. Ferrite grain size and phase volume fraction of three grades of structural steel with similar chemical composition, but different mechanical properties, were examined. Afterwards, samples of the materials were subjected to cyclic bending tests. The results and conclusions are presented in this paper