No abstract

Abstract:The major aim of the newly adopted Mercury Convention is to reduce global mercury (Hg) emissions to the environment. In high temperature industrial processes, including coal combustion, Hg compounds present as impurities in solid materials are decomposed and evaporated leading to the emission of Hg to the atmosphere. The behaviour of different Hg compounds and their mixtures during heating have been the subject of numerous studies, and is the topic of the present work. Controlled heating can be used to fractionate Hg compounds in solid substrates, offering the possibility of identification and quantification of Hg compounds. In the attempt to develop a method for temperature fractionation of Hg, experiments were conducted with pure Hg compounds, and the compounds mixed with different substrates (SiO 2 and CaSO 4 • 2H 2 O), for calibration purposes. Detection was performed by two methods, namely Cold Vapour Atomic Absorption Spectrometry (CV AAS) with Zeeman background correction, and Nier-type Mass Spectrometry with a Knudsen cell (MS). Further investigation is in process.

This work reports the development of ultralight interwoven ultrathin graphitic carbon nitride (g-CN) nanosheets for use as a potential adsorbent in a passive sampler (PAS) designed to bind Hg2+ ions. The g-CN nanosheets were prepared from bulk g-CN synthesised via a modified high-temperature short-time (HTST) polycondensation process. The crystal structure, surface functional groups, and morphology of the g-CN nanosheets were characterised using a battery of instruments. The results confirmed that the as-synthesized product is composed of few-layered nanosheets. The adsorption efficiency of g-CN for binding Hg2+ (100 ng mL−1) in sea, river, rain, and Milli-Q quality water was 89%, 93%, 97%, and 100%, respectively, at natural pH. Interference studies found that the cations tested (Co2+, Ca2+, Zn2+, Fe2+, Mn2+, Ni2+, Bi3+, Na+, and K+) had no significant effect on the adsorption efficiency of Hg2+. Different parameters were optimised to improve the performance of g-CN such as pH, contact time, and amount of adsorbent. Optimum conditions were pH 7, 120 min incubation time and 10 mg of nanosheets. The yield of nanosheets was 72.5%, which is higher compared to other polycondensation processes using different monomers. The g-CN sheets could also be regenerated up to eight times with only a 20% loss in binding efficiency. Overall, nano-knitted g-CN is a promising low-cost green adsorbent for use in passive samplers or as a transducing material in sensor applications.

No abstract

No abstract