The most common and reliable method of protecting a ship’s hull from corrosion is paint coatings. Paint coatings can be used to paint products of any size. In case of complete or partial destruction, the paintwork can be easily restored by tinting or completely repainting the surface. Paints and varnishes are easily combined with other methods of corrosion protection. The use of paint coatings is more economical in comparison with other types of corrosion protection. Therefore, it is currently the most common method of protecting ship hulls. In order to determine the quality, the experimental studies of various paints and varnishes were carried out. Experimental prototypes were made. The effect of low temperatures and the effect of an impending water flow on paint and coatings were considered. The main conclusions were drawn from the results of the experiments. For long-term protection from the external environment, it is necessary that the coating film should maintain high adhesion to the surface maintain continuous, have minimal water absorption, devoid of pores and be solid. Samples with a two-layer and three-layer coating of Jotun paint have the best adhesion. Satisfactory results were also obtained on samples with a three-layer coating of XC-436 enamel and with a two-layer coating of stone red.

No abstract

Most industrial installations for plasma spraying of powder materials are equipped by nozzles with local (radial) powder input into the thermal plasma jet generated by the plasma torch. Such a local input of the sprayed material significantly perturbs the flow of the plasma jet, and causes dispersion of temperature and velocity of the particles of the sprayed powder materials. This work presents study of high-temperature heterogeneous flows generated by the electric arc plasma torch PNK - 50 with an annular (circular) input unit of powder materials with their gas-dynamic focusing developed at ITAM SB RAS. The performed experiments proved that the annular injection of a powder material guarantees the stable formation of a highly concentrated flow of thermal plasma with particles of sprayed powder materials. The comparative analysis clearly showed the advantages of annular powder input unit with its gas-dynamic focusing. In contrast to local point injection, axisymmetric annular injection practically does not disturb the jet of thermal plasma and, thus, significantly increases the efficiency of interphase exchange.

No abstract