No abstract

This article demonstrates morphological based fabrication of Polyaniline mesopores (PANI MS ) via the standard polymerization approach using Triton as an additive and 0.1 M H 2 SO 4 as an electrolyte to achieve improved specific capacity (736 F g À 1 ) in contrast to reported bulk PANI as well as PANI sphere morphologies. PANI MS1 exhibit long cyclic stability and capacitive retention ∼ 83 % in 0.1 M H 2 SO 4 electrolyte after 5000 cycles. This easy and low-cost fabrication of PANI MS was conducted by varying minimal amount of Triton in 0.1 M H 2 SO 4 electrolyte solution to form mesopores. The adsorption and desorption isotherm of the mesopores suggests a specific surface area of 50.9 m 2 g À 1 with a pore diameter of 2.2 nm. The protocol followed to form these PANI MS involves the variation of surfactant Triton to achieve sphere morphology thereby enhancing the charge storage property of PANI. These spheres also possess an enhanced electrical conductivity to be around ∼ 23 S/m than their bulk counterpart. The electrochemical assays show that there is excellent electrolyte ion penetration in the H 2 SO 4 electrolyte which promotes a rapid ion transport to the PANI MS active sites. Also, a low value of R ct ∼ 2.17 Ω helps in giving a good capacitive performance of the PANI MS1 electrode. The electrochemical impedance spectroscopy (EIS) analysis shows a phase degree at 68°, response frequency at 0.38 Hz and time constant at 2.63 s. The study shows the present mesopores morphology of PANI projects to be one of the good electrode candidates for supercapacitor applications.

No abstract