No abstract

This study presents a new strategy for shake table control that uses direct acceleration feedback without need for displacement feedback. To ensure stability against table drift, force feedback is incorporated. The proposed control strategy was experimentally validated using the shake table at the Johns Hopkins University. Experimental results showed that the proposed control strategy produced more accurate acceleration tracking than conventional displacement-controlled strategies. This article provides the control architecture, details of the controller design, and experimental results. Furthermore, the impact of input errors in shake table testing on the structural response is also discussed.

SUMMARY This study proposes a new substructure shake table test method that allows for experimental investigation of the lower portion of structures while the upper part is numerically analyzed. Compatibility conditions are derived to ensure that the dynamic characteristics of the substructured system are equivalent to the reference entire structure. This method utilizes controlled masses to incorporate interface forces from the computational substructure to the experimental substructure. A feasible implementation procedure for the interface force compatibility is developed using a series of conversions and signal processing. For validation of the capabilities and limitations of the proposed substructure method, numerical simulations are performed using detailed models including dynamics of the controlled mass systems. Results from the numerical simulations showed that the proposed substructure method produced comparable results to the reference entire simulations. The average error between top floor displacements produced by substructured and entire responses for earthquake inputs was 7.1%. Numerical studies showed that the substructure method has potential to serve as an alternative to shaking table tests of entire structures. Copyright © 2012 John Wiley & Sons, Ltd.

No abstract