Polish Medical Air Rescue helicopters facilitate the rapid transport of patients to large hospitals. The requirements of the space around the helipad and the safety of flight operations mean that hospitals closer to city centers create more elevated helipads than ground-based helipads. The helipads can vary in the way they are constructed and located - depending on the possibilities offered by hospital buildings and their surroundings.Vibroacoustics Laboratory of the Institute of Aviation measured the vibration properties of some elevated helipads. The goal of this research was to determine the vibration properties of the helipads itself and the transmission of vibrations to the construction of the helipads, the building and its equipment caused by the landing and taking-off of a helicopter.This article presents some of the results of measurements of vibrations of steel constructed elevated helipads with the use of a modal hammer and while landing and taking-off of a helicopter, as well as comparison of the vibration properties concerning various elevated concrete helipads.

No abstract

No abstract

The fatigue test was carried out on an element of a rotor blade removed from the Mi-2 helicopter. The purpose of the test was to check the fatigue strength of the repaired rotor blade. Metal composite rotor blades have a metal spar in the form of a box and the trailing sections in the form of metallic honeycomb sandwich panels. The trailing sections are bonded to the spar. The repair had been carried out at the point where the trailing section became debonded from the spar at the Air Force Institute of Technology in Warsaw using a methodology developed for carrying out repairs of rotor blades’ damage. All types of the Mi family helicopters are equipped with metal composite rotors blades. Depending on MTOW (Maximum Take-Off Weight) and destination of helicopters, blades differ in dimensions, but their design solutions are practically the same. For this reason, the developed repair methodology can be used for all characteristic rotor blades structures for Mi helicopters. The fatigue test was performed at the Łukasiewicz - Institute of Aviation in Warsaw, using a hydraulically driven fatigue machine. The fatigue test was carried out by performing over 1.1 million load cycles. In repair places, upon completion of fatigue testing, no damage was found.