Many bridge superstructures use transverse beams as load carrying components. In these systems, usually the transverse beams are connected to the main longitudinal girders or trusses on the two sides of the bridge. Such systems are commonly used in plate girder, box girder, cable-stayed and truss bridges.  The live load distribution factor (LLDF) for bridge superstructures with transverse beams in AASHTO-LRFD bridge design specification has remained unchanged for decades and is prescribed as a function of the distance between the transverse beams. However, for slab-beam superstructures in which longitudinal beams at close spacing carry the loads to the substructure, the LLDFs have gone through many changes throughout the years and in their current forms depend on many parameters such as concrete slab thickness, beam span, longitudinal beam stiffness as well as the distance between the longitudinal beams. This study investigates the factors affecting the LLDF for transverse beams and intends to obtain new equations similar to AASHTO’s longitudinal beam equations. For this purpose, 3D finite element models of different sample bridges were developed and critical parameters affecting the LLDF were identified and varied. Accordingly, the LLDFs for moment and shear forces of transverse beams were obtained through regression analyses. The proposed equations have less than 3.1% of average error for the cases considered.