Software engineering is the manner of making use of engineering studies and alertness packages to the design, improvement and renovation of software program. For software program builders or college students majoring in data engineering, the software program renovation manner is a totally complicated activity. Software renovation manner charges account for 40% to 80% of the whole software program engineering manner. The software program renovation manner is resulting from based programming, inadequate understanding domains, and application documentation. In this study, researchers attempted to apply the Java programming language and c / c ++ to deal with supply code truncation. After finishing this manner, this system code may be divided into code and remarks. This report could be used to gain data approximately the manner of knowledge this system from the software program renovation manner. For supply code slicing, the writer makes use of normal expressions, specifically textual content processing strategies or patterns. Using normal expressions can accelerate the manner of locating remarks to your application. The end result of this study is to construct software primarily based totally on open supply code (loose license) so that scholars and trendy programmers can use it to assist apprehend this system. According to the effects of the researchers' testing, the recuperation price is 100% and the accuracy is 100%.

The shopping center switchboard system consists of several parts: a 20 kV cabinet to a 20 kV to 380 V step-down transformer, which is then provided to the user to control the newly upgraded LVMDP (low voltage main switchboard). Before distributing to users, they need to pay attention to the fixed power factor of the capacitor bank. Lack of an exemplary power factor will cause an inductive load on the capacitor bank, high temperatures due to high loads will damage the capacitor bank. A switchboard safety automation technology with a microcontroller control system has been proposed to complete this research. Microcontroller control system for switch safety includes Microprocessor (Arduino Nano), light sensor (LDR), temperature sensor (LM35DZ), LCD 16x2 I2C, actuator (fan, buzzer, three-phase network disconnect switch relay), switch (5 VDC relay), ADC As data input. The working principle of the microcontroller is: if the LM35DZ sensor detects the specified temperature, an alarm will be triggered, while the LDR sensor detects a spark, the alarm will be triggered as a danger warning signal and cut off the power grid. Equipment designed to prevent switchboard safety caused by high temperatures or sparks can prevent fires.

So far, solar cells are known to have many weaknesses in terms of installation and position to the sun, so that the performance of solar cells on rechargeable batteries is less than optimal. Therefore, additional tools are needed to support these solar cells so that they can work optimally and produce bigger currents. Compare a sunlight tracker with an LDR system, and compare a sunlight tracker with a direct sunlight sensor with a passive system. Atmega16 is used as a control motor and automatic charger, LDR is used as a sunshine receiver, and a DC motor and a stepper are used as a sunshine indicator player. The solar cell used has a capacity of 20 WP. The automatic filling system uses a microcontroller to increase the cost and efficiency of installation. After that, the two systems will be compared first to find out the difference in power generated by the solar cell system using a tracer and a passive tracer. Using a tracking system will collect data for a week, while using a passive system will collect data for a week. By using the result data to be analyzed, the system can be analyzed and compared, and its efficiency can be determined. The solar cell tracking system is expected to increase battery charge faster than passive locations

Quadcopter UAV is a non-linear system which underactuated and unstable. Those charateristics will be the focus on this study for the development of quadcopter’s control. In this study, the output feedback control used to control the attitude and the position of the quadcopter. This control has H∞ performance which is used to maintain the quadcopter’s stability and toughness. Then, the gain controller is obtained by using the numerical iterative of Linear Matrix Inequality (LMI). Where as, the CommandGenerator Tracker (CGT) used for tracking position control on the X and Y axes. Based on the research problems, this study will present the tracking control design in the horizontal area by adding the Line of Sight algorithm in order to change the path into the zero. The simulation result shows that the control method used is able to bring the yaw, pitch, and roll to the expected values on a circular path.

Di era new normal saat ini, banyak hal yang berubah untuk menyesuaikan keadaan sekitar setelah terjadinya pandemi akibat dari virus Covid 19. Salah satu yang berdampak di era new normal adalah penggunaan transportasi. Banyak masyarakat yang memilih berpergian menggunakan transportasi yang ramah lingkungan dan menyehatkan, salah satunya adalah bersepeda. Sepeda adalah kendaraan yang memiliki dua buah roda atau tiga roda, mempunyai tempat duduk, setang dan sepasang pengayuh yang digerakan menggunakan kaki untuk menjalankannya. Seiring dengan perkembangnya ilmu pengetahuan, Pada tahun 2016, Deshmukh dan kawan kawan melakukan penelitian yang berjudul “Desig of Walking Bike” adalah salah satu pengembangan dari beberapa judul penelitian yang mebahas desain perancangan sepeda treadmill. Penelitian ini melakukan sebuah uji coba mekanik dan desain perancangan dari sepeda treadmill ke dalam bentuk 3D modeling. Banyaknya pengendara sepeda yang kurang memperhatikan kesehatan dengan memaksa untuk mengendarai lebih jauh, serta kurangnya konsumsi air yang cukup mengakibatkan pengendara kekurangan oksigen atau dehidrasi. Hal ini dapat mengakibatkan pengendara kehilangan fokus, pingsan mendadak serta yang lebih parah mengakibatkan serangan jantung. Berdasarkan permasalahan di atas, pada penelitian ini diharapkan mampu mengatasi permasalahan tersebut dengan adaya pembahasan terkait sepeda treadmill yang dilengkapi dengan monitoring detak jantung untuk mengetahui kadar oksigen yang ada pada tubuh. Beradasarkan hasil pengujian kalibrasi terhadap nilai input dan output, didapaykan hasil perbanding pembacaan sensor MAX30102 untuk membaca kondisi detak jantung pengendara sepeda treadmill. Pada pengujian kalibrasi sensor dengan menggunakan validator fingertrip pulse heart didapatkan nilai persentase error sebesar 0,86%. Lalu pengujian dilanjutkan dengan menguji kondisi tubuh seseorang yang berbeda pada saat pengujian kalibrasi. Pengujian dilakukan dengan melakukan uji kepada seseorang dengan umur 19 tahun dengan kondisi setelah melakukan aktifitas renang tepat pada pukul 20.13 malam. Berdasarkan tabel 6 didapatkan nilai rata-rata persentase error sebesar 1,0459%.