There was a substantial lack of consensus relating to marginal adaptation of various crown systems due to differences in testing methods and experimental protocols employed. Direct view technique was the most commonly used method of reproducible results. Also, conducting an experimental set-up of testing a minimum of 30 specimens at 50 measurements per specimen should produce reliable results. Additionally, using a combination of two measurement methods can be useful in verification of results.

The studies reviewed showed a level of heterogeneity, as testing parameters were considered through different setups. The current study demonstrated that various setting of the testing parameters and having a lack of testing standardization has likely led to inconsistency in the reported results. The obvious heterogeneity in the setting of testing variables-especially the magnitude of load and number of cycles applied-made it impractical to run direct comparisons between the reviewed studies. Therefore, specific international standardization of fatigue testing of dental restorations is urgently needed to ensure the delivery of consistent, indicative, and comparable data.

Accelerated aging of silicone specimens in simulated sebum under artificial daylight for 12 months of simulated clinical service greatly affected functional properties of silicone elastomer; however, in real practice, the effect is modest, since sebum concentration is lower, and daylight is less concentrated.