No abstract

Seismic reflection methods have been used for the exploration of mineral resources for several decades. However, despite their unmatched spatial resolution and depth penetration, they only have played a minor role in mineral discoveries so far. Instead, mining and exploration companies have traditionally focused more on the use of potential field, electric and electromagnetic methods. In this context, we present a case study of an underground Vertical Seismic Profiling (VSP) experiment, which was designed to image a (semi-)massive sulfide deposit located in the Kylylahti polymetallic mine in eastern Finland. For the measurement, we used a conventional VSP with three-component geophones and a novel fiber-optic Distributed Acoustic Sensing (DAS) system. Both systems were deployed in boreholes located nearby the target sulfide deposit, and used in combination with an active seismic source that was fired from within the underground tunnels. With this setup, we successfully recorded seismic reflections from the deposit and its nearby geological contrasts. The recording systems provided data with a good signal-to-noise ratio and high spatial resolution. In addition to the measurements, we generated a realistic synthetic dataset based on a detailed geological model derived from extensive drilling data and petrophysical laboratory analysis. Specific processing and imaging of the acquired and synthetic datasets yielded high-resolution reflectivity images. Joint analysis of these images and cross-validation with lithological logging data from 135 nearby boreholes led to successful interpretation of key geological contacts including the target sulfide mineralization. In conclusion, our experiment demonstrates the value of in-mine VSP measurements for detailed resource delineation in a complex geological setting. In particular, we emphasize the potential benefit of using fiber-optic DAS systems, which provide reflection data at sufficient quality with less logistical effort and a higher acquisition rate. This amounts to a lower total acquisition cost, which makes DAS a valuable tool for future mineral exploration activities.

The Millennium uranium deposit is located within the Athabasca Basin, in northern Saskatchewan, Canada. The deposit is hosted within moderately dipping Paleoproterozoic gneisses that are unconformably overlain by more than 500 m of flat lying, porous Paleoproterozoic to late Mesoproterozoic Athabasca Group sandstones. The deposit is associated with the sandstone-basement unconformity, post-Athabasca structure, and hydrothermal alteration. These features combine to create a complex 3D hydrogeologic setting that presents challenges with respect to mine development, production, and safety. In 2007, as part of a prefeasibility study for potential mine development, a seismic program consisting of a 3D surface survey, vertical seismic profiling, moving source profiling, and side-scan surveys was undertaken to map the complex geology. The geometry and resolution of these different seismic surveys allowed for direct imaging of the geologic targets of interest, regardless of orientation and size. After integration with drill-defined geology, the program successfully imaged the location and character of the unconformity, the post-Athabasca structural setting at camp and deposit scales, and the alteration around the deposit. This information increased the understanding of geotechnical aspects of the geology hosting the deposit, and is currently being used to help minimize risk and costs associated with mine development. Seismic surveys are now viewed as an integral part of risk reduction associated with mining in the Athabasca Basin.

Baseline moving source profiling data were acquired in borehole Ketzin 202/2007 along seven lines at the Ketzin CO2 injection site in 2007. The data were recorded on eight three‐component receivers spaced 10 m apart over a depth interval of 470–540 m. The main objective of the moving source profile survey was to generate high‐resolution seismic images around the borehole. This was especially important given that the 3D surface seismic data in the area have a low fold at the injection site. Mapping of the sandy layers in the target formation (Stuttgart Formation) at around 630 m, the approximate CO2 injection depth, was another objective of the research. A comparison with repeat moving source profile surveys, during and after the injection, will be done in the future. A processing sequence consisting in hodogram analysis, wavefield separation and prestack migration was applied to the moving source profile data. A median filter was used to separate the downgoing and upgoing wave modes. The data were processed to generate depth migrated images in the vicinity of the borehole that could be compared with the 3D surface seismic data. Both the modelling studies that were carried out and the migrated images, indicate that the sandy layers within the Stuttgart Formation can potentially be imaged in the moving source profile data whereas reflections from these layers are not as clearly observed in the 3D surface seismic data.

No abstract