Recasting of the casting alloys affects the composition and elemental release which may have cytotoxic effect different from the pure alloy in the surrounding tissues. An Invitro study was conducted to investigate the elemental release and their cytotoxic effects from commercially available Ni-Cr dental casting alloys, commonly used for fabricating fixed partial dentures. Three Ni-Cr alloys [Wiron 99(A), Ceramet (B), and Hi Nickel CB (C)] were tested. Alloy specimens (disks 3 × 5 mm) were casted and grouped as follows: Group I (A(1)/B(1)/C(1)): 100% pure alloy; Group II (A(2)/B(2)/C(2)): 50% new with 50% recast; and Group III (A(3)/B(3)/C(3)): 100% recast. Disks of each alloy type from each group were transferred to Dulbecco's modified eagle medium and left for 3 days at 37°C in an atmosphere of 5% CO(2). Ni, Cr, Co, Cu and Mo elemental release from metal alloys into culture medium was investigated using Inductively Coupled Plasma Mass Spectrometry. Cytotoxicity was tested using mouse fibroblast cells and MTT Assay. Controls consisted of 6 wells containing cells with no alloy specimens. Data were analyzed by two-way analysis of variance followed by t-test. The total amount of elements released in parts per billion for various casting groups were Group I, A(1)-6.572, B(1)-6.732, C(1)-8.407; Group II, A(2)-22.046, B(2)-26.450, C(2)-29.189; Group III, A(3)-84.554, B(3)-88.359, C(3)-92.264. More amounts of elements were released in Hi Nickel CB than Ceramet and Wiron 99 in all the three test groups. Percentage of viable cells from MTT analysis were Group I, A(1)-62.342, B(1)-61.322 C(1)-60.593, Group II, A(2)-58.699, B(2)-56.494, C(2)-52.688, Group III, A(3)-53.101, B(3)-52.195, C(3)-47.586. The viable cells present in the culture media were more in Wiron 99 than Ceramet and Hi Nickel CB. Elemental release increased with amount of recast alloy. Amongst the three alloys tested Hi Nickel CB had significantly higher elements released compared to Ceramet and Wiron 99 in 100% pure alloys, 50% recast and 100% recast alloys. Wiron 99 showed least element release in 100% pure alloy, 50% recast and 100% recast specimens. 100% pure alloys of all three alloys are less cytotoxic, but their cytotoxicity is more on 50% and 100% re-casted alloys. Out of all three variations of casting Wiron 99 was least cytotoxic, followed by Ceramet and Hi Nickel CB. Recasting of alloys significantly increased the elements released and their cytotoxicity.

No abstract

Aims:To evaluate the accuracy of dies made from dual arch impressions using different sectional dual arch trays, combinations of elastomeric impression materials, and the sequence of pour of dies.Subjects and Methods:The dual arch impression materials were grouped into three groups depending on the combination of impression materials used and each group is subdivided into four subgroups. A sample size of 8 in each subgroup yielding a total 96 impressions will be made into three groups of 32 each (Group I, II, and III). Group I constitute impressions made using monophase (M) impression material, Group II constitute impressions made using combination of heavy body and light body (HL), and Group III constitute impressions made using combination of putty and light body (PL). Dies obtained were evaluated with a travelling microscope to measure the buccolingual width of the tooth at the margin by using the sharp corners of the notches as reference points.Statistical Analysis Used:Descriptive analysis namely mean and standard deviation, one-way analysis of variance test.Results:The results obtained in this study indicate that though not statistically significant, the metal dual arch trays performed better when compared to the plastic trays in reproducing die dimensions.Conclusions:From the results obtained, dies poured from combination of heavy body and light body impressions using plastic or metal dual arch trays showed least variation in bucco-lingual dimension from master model.

No abstract

No abstract