Abstract-Three pairs of 20.5 kA current leads for the ATLAS Toroid Magnets have been designed, manufactured and tested at Kurchatov Institute. The current leads have a high mechanical reliability and the vacuum tightness under 30 bars of internal pressure. The insulation between the current carrying parts and the mounting flange, the hydraulic connections and the temperature gauges withstand the overvoltage of at least 2 kV. The current leads are fully equipped with diagnostics needed for safety and control. The current leads were tested up to 24 kA. According to CERN's specification they were also tested in the absence of any cooling at very slow current discharge rate (5 A/s) from 20.5 kA to zero without any excessive overheating. Nowadays the current leads are successfully used at the ATLAS Magnet Test Facility at CERN.

No abstract

No abstract

This article focuses on ordinary, familiar to us structures and what other benefits, except for their intended use, they can bring. One of the most pressing problems of the modern world is the excessive use of non-renewable or hardly renewable natural resources. The key element necessary for the operation of transport is gasoline extracted from oil, which is a hardly renewable natural resource, at the moment the rate of consumption of oil significantly exceeds the rate of its occurrence in the natural environment. In addition, people use atomic power stations to produce energy used in everyday life, many plants and factories are built to produce various things necessary for life, and sometimes just to increase comfort. All this has a very negative impact on the environment, and to clean it after such pollution is a very difficult task. In this way, in the use of current energy sources, we distinguish 2 significant flaws – the exhaustion and difficulty of renewal of the key components necessary for obtaining energy and the negative impact on the world around us. Many states came to the conclusion that it would be much more rational to develop a new approach to energy production, based on the use of inexhaustible and environmentally friendly natural elements. The main example of this approach is the use of solar energy by converting it into electricity using solar panels. In this article, we will look at solar panels and their use in road construction as a way to generate energy and solve environmental problems.