No abstract

This study is concerned with the active T-foil placed near the bow on the keel line of the fast ferry and two active trim tab controls placed at the stern to improve the maritime performance of a fast ferry, whilst improving the comfort and safety of passengers and crew. In the scope of the study, the vertical direction of the fast ferry under the random head waves, heave and pitch motions were taken into account. For the control of T-foil and trim Tabs, PID and LQR control methods were used. The purpose of these controllers is to reduce the acceleration of the heave and pitch motions of the fast ferry by changing the operating angles of the T-foil and trim tab wings. A random wave model was created using the Pierson-Moskowitz model, and simulations were done assuming that the fast ferry was subjected to random head waves. Finally, in order to see the effect of vertical acceleration on passengers, the rate of seasickness (MSI) change of the fast ferry in uncontrolled and controlled states was examined. Mathematical models of fast ferry, T-foil and trim tab and their simulations were carried out in MATLAB / Simulink environment. The simulation results show that T-foil and trim tab Active systems can effectively reduce vertical acceleration by improving heave and pitch motions.

Nowadays, interceptors are often used to decrease total resistance and enhance comfort by reducing dynamic trim for high-speed planing vessels. They can be controlled manually as well as automatically by using a suitable closed-loop control system. Thus, in the present study, an automatically controllable system is presented to minimize the total resistance by reducing the dynamic trim in calm water. To reach this aim, a mathematical model which can represent the 2 degree of freedom vertical motion of a prismatic planing vessel is presented. The coefficients used in the model are calculated by using the Savitsky method. The standard dynamic trim angle and the optimum ones in terms of resistance are calculated by using the same method. For control action, a linear full state feedback control strategy (linear quadratic regulator) is applied, and instantaneous blade heights are found considering the change in forward speed. Therefore, the control-oriented model is able to change the blade height to reach the optimum trim angle in terms of the total resistance of the vessel for different forward speeds and speed profiles. The results show that the designed linear quadratic regulator control strategy is successful for reference trim tracking problems.

No abstract